M28748/9G0N0 Receptacle Electrical Connector

Datasheet. M28748/9G0N0 specification

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

straight shape, rectangular

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.180in. ⁓1-3/16"

Overall Height
The distance measured in a straight line from the bottom to the top of an item.

1.860in.

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

2.875in.

Environmental Protection
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.

corrosion resistant and moisture resistant and vibration resistant

Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.

0.149in.

Center To Center Distance Between Mounting Facilities Parallel To Height
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.

1.250in.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
The distance between centerlines of mounting facilities parallel to the width of the item.

2.500in.

Mating End Quantity
The number of mating ends provided with the item which are designed to accommodate another connector.

Contact Position Arrangement Style
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.

158 single mating end

Contact Removability
An indication of whether or not the contact(s) is removable.

removable single mating end single contact grouping

Contact Maximum Current Rating In Amps
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.

13.0 single mating end single contact grouping

Polarization Method
The means used to prevent mismating or cross plugging of contacts.

polarization boss

Connector Locking Method
The means used to secure a connector to its mating counterpart.

friction

Terminal Location
Indicates the location of the terminal/s/ on the item.

back single mating end single contact grouping

Contact Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.

gold single mating end single contact grouping

Insert Material
The chemical compound or mechanical mixture properties of which the insert is fabricated.

plastic phenolic single mating end

Contact Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.

MIL-G-45204, type i mil spec single treatment response single mating end single contact grouping

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

crimp single mating end single contact grouping

Insert Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.

MIL-M-14, SDG-F mil spec single material response single mating end or MIL-P-19833, GDI-30F mil spec single material response single mating end

Included Contact Quantity
The number of contacts included with the item which provides electrical connection.

158 single mating end single contact grouping

Included Contact Type
Indicates the type of contact(s) included with the item.

round pin single mating end single contact grouping

Precious Material And Location
An indication of the precious material and its location in the item.

contact surfaces gold

Precious Material
Identification of the precious material contained in the item.

gold

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-C-28748/9 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Answers.

What is the overall width?

2.875 inches

What is the NSN for M28748/9G0N0?

5935-01-139-5423

How is this classified for shipping?

Schedule B number: 8538907080
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537

What's the federal classification of M28748/9G0N0?

FSC 5935 ⁓ Connectors, electrical

Excluding interconnectors, fiber optic

M28748/9G0N0

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. M28748/9G0N0 specification

Answers.

NSN 5935-01-139-5423 CONNECTOR,RECEPTACLE,ELECTRICAL

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for M28748/9G0N0 A member of our team will provide you with a price and availability quote

Similar by Design Other connectors with similar characteristics

M28748/9G0N0 / Connector,receptacle,electricalWhat is the formal definition of this item?

1.	MIL-C-28748/9	Cage 81349
2.	4118905-183	Cage 05869