Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FA5511-60-02-23 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a and 2b and 2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand and RIGHT-Hand and RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.350in. ⁓3-23/64"
The distance measured in a straight line from the bottom to the top of an item.
0.712in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.250in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
humidity resistant and shock resistant and vibration resistant and salt water resistant
The distance between mounting facility centers.
3.150in.
Indicates the type of threaded device included on the item.
coupling facility and mounting stud
The number of mating ends provided with the item which are designed to accommodate another connector.
1
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
2 rows of contacts NON-Inserted board single mating end
An indication of whether or not the contact(s) is removable.
nonremovable single mating end 1st contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
5.0 single mating end 1st contact grouping
The means used to prevent mismating or cross plugging of contacts.
jackscrew
The means used to secure a connector to its mating counterpart.
JACKSCREW-Socket
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
56 and 56 and 56
A designation that is used for the purpose of general identification of the thread.
0.086in. and 0.086in. and 0.086in. ⁓3/32"
Indicates the location of the terminal/s/ on the item.
back single mating end 1st contact grouping
The chemical compound or mechanical mixture properties of which the contact is fabricated.
copper alloy single mating end 1st contact grouping
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
copper single mating end 1st contact grouping and nickel single mating end 1st contact grouping and gold single mating end 1st contact grouping
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic diallyl phthalate single mating end and glass single mating end or plastic polyester single mating end
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.
MIL-C-14550 mil spec 1st treatment response single mating end 1st contact grouping and QQ-N-290, class 2 fed spec 2nd treatment response single mating end 1st contact grouping and MIL-G-45204, ty ii, grade c, class 1 mil spec 3rd treatment response single mating end 1st contact grouping
Indicates the type of terminal for providing electrical connection to the item.
solder well single mating end 1st contact grouping
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the contact material.
QQ-C-530 fed spec single material response single mating end 1st contact grouping or QQ-B-750 fed spec single material response single mating end 1st contact grouping
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.
MIL-M-14, ty SDG-F or ty GDI-30F mil spec 1st material response single mating end and MIL-M-14, ty SDG-F or ty GDI-30F mil spec 2nd material response single mating end or MIL-M-24519, ty GPT-30F or GST-40F mil spec 3rd material response single mating end
The number of contacts included with the item which provides electrical connection.
59 single mating end 1st contact grouping
Indicates the type of contact(s) included with the item.
round socket single mating end 1st contact grouping
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
jackscrew TYPE-Female and LOCATION-Left handandjackscrew TYPE-Male and LOCATION-Right hand
An indication of the precious material and its location in the item.
contact surfaces gold
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.059 gold grains, troy
Identification of the precious material contained in the item.
gold
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc and unc and unc
Answers.
1EA
Unc and unc and unc
56 and 56 and 56
0.250 inches
Right-hand and right-hand and right-hand
2a and 2b and 2a
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-269-4000 CONNECTOR,RECEPTACLE,ELECTRICAL
unc thread series jackscrew type-female 56 thread quantity per inch 0.250" overall width 3.350" overall length right-hand 2a thread class
- NIIN
- 012694000
- NIIN Date
- 12/16/87
- Schedule B
- 8538907080
- Name Code
- 15093
- FIIG
- A039B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $152.80 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | WTAV60SAD11JL444-2 | Cage 10400 |
| 2. | 534808-153 | Cage 96214 |
Major End Users Countries and entities
- - Department of The Navy
Availability for FA5511-60-02-23 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
FA5511-60-02-23 / Connector,receptacle,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
