Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7406889P1 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand and RIGHT-Hand
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.656in. ⁓2-21/32"
The length of a straight line which passes through the center of a bushing,and terminates at the circumference.
1.750in.
A measurement of the longest straight line across a circular cross-sectional plane.
3.188in. ⁓3-13/64"
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
pressure proof and corrosion resistant
Indicates the type of threaded device included on the item.
coupling facility and hub
The number of mating ends provided with the item which are designed to accommodate another connector.
1
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
22.0 single mating end 1st contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
41.0 single mating end 2nd contact grouping
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
200.0 single mating end 1st contact grouping
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
500.0 single mating end 2nd contact grouping
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.
250.0 single mating end 1st contact grouping
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.
700.0 single mating end 2nd contact grouping
The means used to secure a connector to its mating counterpart.
externally threaded shell
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 and 18
A designation that is used for the purpose of general identification of the thread.
1.750in. and 1.750in. ⁓1-3/4"
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic single mating end
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy
The number of contacts included with the item which provides electrical connection.
4 single mating end 2nd contact grouping
The number of contacts included with the item which provides electrical connection.
6 single mating end 1st contact grouping
The physical configuration of the hole designed to accommodate a bushing.
round
Indicates the type of contact(s) included with the item.
round pin single mating end all contact groupings
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
polarized; built in by pass capacitors, 2000 mmfd plus or minus 20 percent on all pins; dim excl terminals
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns and uns
Answers.
Uns and uns
18 and 18
Right-hand and right-hand
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-00-201-9303 CONNECTOR,RECEPTACLE,ELECTRICAL
uns thread series polarized; built in by pass capacitors, 2000 mmfd plus or minus 20 percent on all pins; dim excl terminals 18 thread quantity per inch 2.656" overall length right-hand
- NIIN
- 002019303
- NIIN Date
- 01/01/61
- Schedule B
- 8538907080
- Name Code
- 15093
- FIIG
- A039B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Portugal
Availability for 7406889P1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
7406889P1 / Connector,receptacle,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
