Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 715278-5 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, flush mount
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.326in. ⁓1-21/64"
The distance measured in a straight line from the bottom to the top of an item.
3.000in. and 3.090in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.985in. and 2.015in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
humidity resistant and salt water resistant and shock resistant and thermal shock resistant and vibration resistant
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.118in. and 0.122in.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
2.778in. and 2.788in.
The distance between centerlines of mounting facilities parallel to the width of the item.
1.432in. and 1.442in.
0.055in. and 0.065in.
The number of mating ends provided with the item which are designed to accommodate another connector.
2
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
57 1st mating end
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
67 2nd mating end
An indication of whether or not the contact(s) is removable.
removable all mating ends all contact groupings
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
13.0 2nd mating end 1st contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
7.5 1st mating end single contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
7.5 2nd mating end 2nd contact grouping
The means used to prevent mismating or cross plugging of contacts.
3 polarization posts
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
post jacksocket
Indicates the location of the terminal/s/ on the item.
back all mating ends all contact groupings
The chemical compound or mechanical mixture properties of which the contact is fabricated.
copper alloy all mating ends all contact groupings
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
gold all mating ends all contact groupings
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic diallyl phthalate all mating ends or plastic epoxy all mating ends or plastic phenolic all mating ends
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.
MIL-G-45204 mil spec single treatment response all mating ends all contact groupings
Indicates the type of terminal for providing electrical connection to the item.
crimp all mating ends all contact groupings
The design of the polarizing guide and its location on the item.
hexagon shape female post LEFT-Hand at 12 oclock and hexagon shape female post center at 12 oclock and hexagon shape female post RIGHT-Hand at 12 oclock
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
cadmium and chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.
QQ-P-416 fed spec 1st treatment response
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the shell material.
QQ-A-591 fed spec single material response or QQ-A-367 fed spec single material response or QQ-A-250 fed spec single material response
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.
MIL-M-14 mil spec single material response all mating ends or 1288 bx mfr ref single material response all mating ends
Indicates the type of contact(s) included with the item.
round pin all mating ends all contact groupings
An indication of the precious material and its location in the item.
contact surfaces gold
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.124 gold grains, troy
Identification of the precious material contained in the item.
gold
Answers.
1.985 inches minimum and 2.015 inches maximum
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-166-8986 CONNECTOR,RECEPTACLE,ELECTRICAL
1.985" overall width 1.326" overall length
- NIIN
- 011668986
- NIIN Date
- 11/18/83
- Schedule B
- 8538907080
- Name Code
- 15093
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | RM2R67P57P-00(200) | Cage 00779 |
| 2. | DPX2NA-67MP57MP-34B-00 | Cage 71468 |
Major End Users Countries and entities
- - Nato Maintenance And Supply Agency
Availability for 715278-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
715278-5 / Connector,receptacle,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
