Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. D38999/20WH35BC specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand and RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, external coupling
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
33.66 mm
The distance measured in a straight line from the bottom to the top of an item.
42.9 mm
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
42.9 mm
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
34.93 mm
The distance between centerlines of mounting facilities parallel to the width of the item.
34.93 mm
20.1 mm
Indicates the type of threaded device included on the item.
back shell and coupling facility
The number of mating ends provided with the item which are designed to accommodate another connector.
1
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
23-35 single mating end
The means used to prevent mismating or cross plugging of contacts.
keyway or multiple keyway
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.
103.0 and 160.0 and 220.0 and 294.0
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
externally threaded shell
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
7.11 mm
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
10
A designation that is used for the purpose of general identification of the thread.
34.0 mm and 1.500in.
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.00
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic epoxy single mating end
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.
QQ-P-416 fed spec single treatment response
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.
6g external
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
mounting slot width 3.91 mm
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-DOD-C-38999 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso m and special acme
The document designator of the specification or standard which established the item of supply.
81349-DOD-C-38999/20 government specification
Answers.
1EA
Iso m and special acme
10
42.9 millimeters
Right-hand and right-hand
2a
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-267-3972 CONNECTOR BODY,RECEPTACLE,ELECTR
iso m thread series mounting slot width 3.91mm 10 thread quantity per inch 42.9mm overall width 33.66mm overall length right-hand 2a thread class
- NIIN
- 012673972
- NIIN Date
- 11/10/87
- Schedule B
- 8538907080
- Name Code
- 61925
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $84.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | DOD-C-38999/20 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Navy
- - France
- - Republic of Korea
Availability for D38999/20WH35BC A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connector bodys with similar characteristics
Nothing similar to this part number was found in our inventory
D38999/20WH35BC / Connector body,receptacle,electrWhat is the formal definition of this item?
The main or principal part of a connector, receptacle, electrical which includes insert(s) designed to accommodate but does not include removable contacts. it may have a hood or shell, a jackscrew and jacksocket, or other means for polarizing and aligning. it is designed to be mounted on a bulkhead, chassis, panel, wall, or the like. excludes connector body, modular receptacle, electrical. for items without inserts, see shell, electrical connector.
