Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MMP92159-1 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
0.250in. single connection
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
salt spray resistant and fungus resistant
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.219in. ⁓3-7/32"
The distance measured in a straight line from the bottom to the top of an item.
5.750in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.370in.
A measurement from the bottom to the top of the body,in distinction from depth.
3.000in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.281in.
The longest distance between mounting centers parallel to the horizontal plane.
2.720in.
The longest distance between mounting centers parallel to the vertical plane.
2.720in.
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
gage
The temperature at which the item operates.
30.0 deg fahrenheit and 110.0 deg fahrenheit
The means of attaching the item.
bracket and unthreaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
electrical access port
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.
7000.00 pounds per square inch gage
A designation that is used for the purpose of general identification of the thread.
0.250in. single pressure connection ⁓1/4"
The general configuration and relative position of the facilities provided for mounting the item.
two position diagonal
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, double break/double make, permanent jumper, both positions maintained
Indicates the type of terminal for providing electrical connection to the item.
screw
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes resistive load first voltage
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes resistive load second voltage
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes resistive load third voltage
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load fifth voltage
The amount of current that the contacts are rated to make or break with a specified load.
500.0 milliamperes resistive load sixth voltage
The amount of current that the contacts are rated to make or break with a specified load.
7.5 amperes resistive load fourth voltage
The adjustability of the contact.
actuation point adjustable, preset
The minimum and maximum limits to which the contact(s) may be adjusted.
+100.00/+1500.00 actuation point pounds per square inch gage
Indicates the type of device provided for manual adjustment of the contact(s).
internal actuation point screw
The rating of the stimulus required to actuate and/or deactuate the contact(s).
320.00 actuation point pounds per square inch gage and 245.00 deactuation point pounds per square inch gage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
125.0 ac at sea level first voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
125.0 dc at sea level fifth voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
250.0 ac at sea level second voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
250.0 dc at sea level sixth voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
480.0 ac at sea level third voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
600.0 ac at sea level fourth voltage
Indicates the type of pressure connector.
plain, threaded internal single connection
The cycles per second /hertz/ of the alternating current.
60.0 first voltage
The cycles per second /hertz/ of the alternating current.
60.0 fourth voltage
The cycles per second /hertz/ of the alternating current.
60.0 second voltage
The cycles per second /hertz/ of the alternating current.
60.0 third voltage
The type of media for which the item is designed.
gas, liquefied
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
rectangular
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
npt single pressure connection
Answers.
1EA
Npt single pressure connection
Rectangular
2.370 inches
0.250 inches single connection
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-174-8593 SWITCH,PRESSURE
npt single pressure connection thread series rectangular 2.370" overall width 3.219" overall length 0.250" single connection inside diameter
- NIIN
- 011748593
- NIIN Date
- 03/23/84
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 1.800lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,176.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
- - Greece
Availability for MMP92159-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
MMP92159-1 / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
