Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M9395/26-ESD specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a single pressure connection
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
vibration resistant
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.325in. ⁓2-21/64"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.438in. single connection
A measurement of the longest dimension of the body,in distinction from width.
1.545in.
A measurement of the longest straight line across a circular cross-sectional plane.
0.995in. and 1.150in. ⁓1-5/32"
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
absolute
The shortest straight line between flats,perpendicular to the height.
0.688in. and 1.000in. ⁓1/64"
The temperature at which the item operates.
-65.0 deg fahrenheit and 275.0 deg fahrenheit
The means of attaching the item.
input port
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.
120.00 pounds per square inch absolute
A designation that is used for the purpose of general identification of the thread.
0.438in. single pressure connection ⁓29/64"
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary
The pressure at which the pressure sensing element of the item is rendered inoperative by rupture or other permanent physical damage.
800.00 pounds per square inch absolute
Indicates the type of terminal for providing electrical connection to the item.
wire hook
The amount of current that the contacts are rated to make or break with a specified load.
3.0 amperes resistive load single voltage and 1.0 amperes inductive load single voltage
The adjustability of the contact.
actuation point not adjustable and deactuation point not adjustable
The rating of the stimulus required to actuate and/or deactuate the contact(s).
42.50 actuation point pounds per square inch absolute and 38.10 deactuation point pounds per square inch absolute
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
28.0 dc at sea level single voltage
Indicates the type of pressure connector.
swivel nut, flared, threaded external single connection
The type of media for which the item is designed.
gas or liquid
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
cylindrical
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-S-9395 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf single pressure connection
The document designator of the specification or standard which established the item of supply.
81349-MIL-S-9395/26 government specification
Answers.
Unf single pressure connection
Cylindrical
0.438 inches single connection
3a single pressure connection
Schedule B number: 8536509065
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-342-6730 SWITCH,PRESSURE
unf single pressure connection thread series cylindrical 0.438" single connection outside diameter 2.325" overall length 3a single pressure connection thread class
- NIIN
- 013426730
- NIIN Date
- 07/29/91
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-S-9395/26 | Cage 81349 |
Availability for M9395/26-ESD A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
M9395/26-ESD / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
