Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. J7-258-20PSI specification
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
general PURPOSE-Nema type 1
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.188in. ⁓3-13/64"
The distance measured in a straight line from the bottom to the top of an item.
4.906in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.562in.
A measurement from the bottom to the top of the body,in distinction from depth.
2.750in.
The national stock number or the identification information of the end equipment for which the item is a part.
jet engine t std 54932
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
gage
The means of attaching the item.
bracket and threaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
electrical access port
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 all threaded hole
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.
75.00 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.190in. all threaded hole ⁓13/64"
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary
Indicates the type of terminal for providing electrical connection to the item.
screw
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes resistive load first voltage
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes resistive load second voltage
The adjustability of the contact.
deactuation point adjustable, preset and actuation point adjustable, preset
The minimum and maximum limits to which the contact(s) may be adjusted.
+1.50/+52.50 actuation point pounds per square inch and +0.00/+50.00 deactuation point pounds per square inch
Indicates the type of device provided for manual adjustment of the contact(s).
internal deactuation point hex nut and internal actuation point hex nut
The rating of the stimulus required to actuate and/or deactuate the contact(s).
20.00 actuation point pounds per square inch and 1.50 differential point pounds per square inch and 2.50 differential point pounds per square inch
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
125.0 ac at sea level second voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
250.0 ac at sea level first voltage
Indicates the type of pressure connector.
plain, threaded internal single connection
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf all threaded hole
Answers.
1EA
Unf all threaded hole
32 all threaded hole
1.562 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-079-8509 SWITCH,PRESSURE
Used on jet engine t std 54932. unf all threaded hole thread series 32 all threaded hole thread quantity per inch 1.562" overall width 3.188" overall length
- NIIN
- 010798509
- NIIN Date
- 07/15/79
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 1.500lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $221.10 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | DMS 86108B | Cage 16236 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for J7-258-20PSI A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
J7-258-20PSI / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
