Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. D1X-A3-UL specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
7.750in. ⁓7-3/4"
The distance measured in a straight line from the bottom to the top of an item.
6.531in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
4.937in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.343in.
The distance between mounting facility centers.
4.300in.
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
gage
The means of attaching the item.
base and unthreaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
tamper proof cap
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 single pressure connection
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.
10.00 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.250in. single pressure connection ⁓1/4"
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
The amount of current that the contacts are rated to make or break with a specified load.
15.0 amperes inductive load fourth voltage
The amount of current that the contacts are rated to make or break with a specified load.
10.0 amperes inductive load first voltage
The amount of current that the contacts are rated to make or break with a specified load.
10.0 amperes inductive load second voltage
The amount of current that the contacts are rated to make or break with a specified load.
50.0 milliamperes inductive load third voltage
The adjustability of the contact.
deactuation point adjustable and actuation point adjustable
The minimum and maximum limits to which the contact(s) may be adjusted.
+0.14/+3.00 actuation point pounds per square inch and +0.03/+2.89 deactuation point pounds per square inch
Indicates the type of device provided for manual adjustment of the contact(s).
external deactuation point screw and external actuation point screw
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
125.0 ac at sea level second voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
250.0 dc at sea level third voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
480.0 ac at sea level first voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
6.0 dc at sea level fourth voltage
Indicates the type of pressure connector.
swivel nut with compression sleeve, threaded internal single connection
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
npt single pressure connection
Answers.
Npt single pressure connection
18 single pressure connection
Schedule B number: 8536509065
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-082-7138 SWITCH,PRESSURE
npt single pressure connection thread series 18 single pressure connection thread quantity per inch 7.750" overall length
- NIIN
- 010827138
- NIIN Date
- 09/08/79
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - National Aeronautics And Space Administration
Availability for D1X-A3-UL A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
D1X-A3-UL / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
