607G588

607G588 Pressure Switch
Home » Catalog » Electrical (p. 2050) » Pressure Switches (p. 1) » Part Number 607G588

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 607G588 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a single threaded hole

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

3.430in. ⁓3-7/16"

Outside Diameter
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.

0.4375in. single connection

Overall Height
The distance measured in a straight line from the bottom to the top of an item.

1.000in.

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

3.430in.

Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.

0.038in. and 0.050in.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

switch used for gage pressure

Pressure Switch Type
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.

gage

Operating Temp Rating
The temperature at which the item operates.

-31.0 deg celsius and 71.0 deg fahrenheit

Mounting Method
The means of attaching the item.

terminal and threaded hole

Contact Action Stimulus
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.

decrease

Proof Pressure
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.

1000.00 pounds per square inch gage

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

20.000in. single threaded hole ⁓20-1/64"

Nonpile-up Contact Arrangement
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.

3 pole, double throw, both positions maintained

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

connector, receptacle

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

5.0 milliamperes resistive load single voltage

Contact Adjustability
The adjustability of the contact.

actuation point not adjustable

Contact Adjustment Type
Indicates the type of device provided for manual adjustment of the contact(s).

external actuation point hex nut

Contact Voltage Rating In Volts
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.

20.0 dc at sea level single voltage

Pressure Connector Type
Indicates the type of pressure connector.

plain, threaded external single connection

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

contact action stimulus will increase pressure by 1750 psig and will decrease pressure at 1500 psig; media will be dry air

Media For Which Designed
The type of media for which the item is designed.

gas

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

cylindrical w/flange

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf single threaded hole

Answers.

What class is the thread series?

Unjf single threaded hole

What is the style?

Cylindrical w/flange

What is the overall width?

3.430 inches

What is the outside diameter?

0.4375 inches single connection

What is the thread class?

3a single threaded hole

What is the NSN for 607G588?

5930-01-471-3148

How is this classified for shipping?

Schedule B number: 8536509065
Switches, for a voltage not exceeding 1000 volts

What's the federal classification of 607G588?

FSC 5930 ⁓ Switches

Excluding switchgear.

NSN 5930-01-471-3148 SWITCH,PRESSURE

Used on switch used for gage pressure. unjf single threaded hole thread series cylindrical w/flange contact action stimulus will increase pressure by 1750 psig 3.430" overall width 0.4375" single connection outside diameter 3.430" overall length 3a single threaded hole thread class

NIIN
014713148
NIIN Date
01/28/00
Schedule B
8536509065 
Name Code
00206
FIIG
A048B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. SM91024-001 Cage K0216

Major End Users Countries and entities

  • - United Kingdom 

Availability for 607G588 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other switchs with similar characteristics

Nothing similar to this part number was found in our inventory

607G588 / Switch,pressureWhat is the formal definition of this item?

A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.