Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 5M1685-001 specification
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
dustproof
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.250in. ⁓2-1/4"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
0.112in. all connections
The distance measured in a straight line from the bottom to the top of an item.
1.130in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.250in.
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
0.160in.
A measurement of the longest dimension of the body,in distinction from width.
2.000in.
The longest distance between mounting centers parallel to the horizontal plane.
1.750in.
The longest distance between mounting centers parallel to the vertical plane.
0.880in.
The national stock number or the identification information of the end equipment for which the item is a part.
target g n el 76301
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
gage
The means of attaching the item.
slot and threaded hole
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 all threaded hole
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
A designation that is used for the purpose of general identification of the thread.
0.138in. all threaded hole ⁓9/64"
The general configuration and relative position of the facilities provided for mounting the item.
four position rectangular
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, normally open, momentary action
Indicates the type of terminal for providing electrical connection to the item.
screw
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load single voltage
The adjustability of the contact.
deactuation point adjustable and actuation point adjustable
The minimum and maximum limits to which the contact(s) may be adjusted.
+1.00/+16.00 actuation pointin. of water and +1.00/+16.00 deactuation pointin. of water
Indicates the type of device provided for manual adjustment of the contact(s).
internal deactuation point screw and internal actuation point screw
The rating of the stimulus required to actuate and/or deactuate the contact(s).
15.00 differential point in. of water
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
300.0 ac at sea level single voltage
Indicates the type of pressure connector.
plain, unthreaded external all connections
The type of media for which the item is designed.
gas
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc all threaded hole
Answers.
1EA
Unc all threaded hole
32 all threaded hole
2.250 inches
0.112 inches all connections
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-115-5121 SWITCH,PRESSURE
Used on target g n el 76301. unc all threaded hole thread series 32 all threaded hole thread quantity per inch 2.250" overall width 0.112" all connections outside diameter 2.250" overall length
- NIIN
- 011155121
- NIIN Date
- 07/08/81
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $126.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AW | Cage 12427 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 5M1685-001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
5M1685-001 / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
