Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 414-37DBL-5 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
0.125in. single connection
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.063in. ⁓4-5/64"
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
4.063in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
3.000in.
A measurement of the longest dimension of the body,in distinction from width.
2.531in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.195in. and 0.200in.
The longest distance between mounting centers parallel to the horizontal plane.
0.625in.
The longest distance between mounting centers parallel to the vertical plane.
3.000in.
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.
gage
The means of attaching the item.
bracket and unthreaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
tamper proof cap
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
27 single pressure connection
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
decrease
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.
150.00 pounds per square inch
A designation that is used for the purpose of general identification of the thread.
0.125in. single pressure connection ⁓1/8"
The general configuration and relative position of the facilities provided for mounting the item.
four position rectangular
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary
Indicates the type of terminal for providing electrical connection to the item.
connector, receptacle
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load single voltage
The adjustability of the contact.
deactuation point not adjustable and actuation point not adjustable
The rating of the stimulus required to actuate and/or deactuate the contact(s).
60.00 actuation point pounds per square inch and 70.00 deactuation point pounds per square inch and 10.00 differential point pounds per square inch
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
30.0 dc at sea level single voltage
Indicates the type of pressure connector.
double compression, threaded internal single connection
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
circuit no. 2; high pressure; to actuate on increasing pressure at 120 psi and deactuate on decreasing pressure at 105 psi
The type of media for which the item is designed.
gas
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
cylindrical w/mounting lugs
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
npt single pressure connection
Answers.
1EA
Npt single pressure connection
Cylindrical w/mounting lugs
27 single pressure connection
4.063 inches
0.125 inches single connection
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-313-1848 SWITCH,PRESSURE
npt single pressure connection thread series cylindrical w/mounting lugs circuit no. 2; high pressure; to actuate on increasing pressure at 120 psi 27 single pressure connection thread quantity per inch 4.063" overall width 4.063" overall length 0.125" single connection inside diameter
- NIIN
- 003131848
- NIIN Date
- 01/01/63
- Schedule B
- 8536509065
- Name Code
- 00206
- FIIG
- A048B0
- Item Weight
- 2.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $151.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Germany
- - Portugal
- - Greece
- - Turkey
Availability for 414-37DBL-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
414-37DBL-5 / Switch,pressureWhat is the formal definition of this item?
A switch which is actuated by changes in pressure of any gas or liquid or by changes in a vacuum acting upon its sensing element. excludes baroswitch; switch, pressure-thermostatic; and switch, sensitive.
