025-25037B001 Pressure Switch

Datasheet. 025-25037B001 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a single pressure connection

Inside Diameter
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.

0.250in. single connection

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

5.188in. ⁓5-13/64"

Overall Height
The distance measured in a straight line from the bottom to the top of an item.

5.406in.

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

2.812in.

Body Height
A measurement from the bottom to the top of the body,in distinction from depth.

2.750in.

Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.

0.281in.

Distance Between Mounting Facility Centers
The distance between mounting facility centers.

5.250in.

Pressure Switch Type
The general classification of a pressure switch based on the reference method used to measure the sensed pressure.

gage

Mounting Method
The means of attaching the item.

bracket and unthreaded hole

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

electrical access port

Contact Action Stimulus
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.

decrease

Proof Pressure
The maximum pressure that an item will withstand without resulting in any permanent changes in the structural,mechanical,or electrical characteristics.

200.00 pounds per square inch gage

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.250in. single pressure connection ⁓1/4"

Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.

two position IN-Line

Nonpile-up Contact Arrangement
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.

1 pole, single throw, both positions maintained

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

screw

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

15.0 amperes resistive load first voltage

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

15.0 amperes resistive load second voltage

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

15.0 amperes resistive load third voltage

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

0.3 amperes resistive load fifth voltage

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

0.5 amperes resistive load fourth voltage

Contact Adjustability
The adjustability of the contact.

actuation point adjustable

Contact Adjustment Range
The minimum and maximum limits to which the contact(s) may be adjusted.

+9.82/+114.70 actuation point pounds per square inch absolute

Contact Adjustment Type
Indicates the type of device provided for manual adjustment of the contact(s).

external actuation point screw