Serving our customers with quality and safety first.
4
cylindrical servo mounted
not established
1.2495in. and 1.2500in.
0.0570in. and 0.0670in.
3.625in. ⁓3-5/8"
1.880in.
0.0570in.
2.030in.
0.1869in. and 0.1872in.
0.630in. and 0.650in.
2.885in.
1.9950in. and 2.0050in.
0.0570in. and 0.0670in.
round, slotted
ball
rotary
28.0
single shaft
349.8
2.60 INCH-Ounces
0.005in.
0.002in.
0.004in.
0.001in.
0.002in.
0.1
start of rotation
single pole, single throw, normally open, both positions maintained
radially positioned over less than half the circumference
clamp ring
switch
2.0 percent, rated amperes c and better finish
20.0 percent, rated amperes c and better industrial clears
75.4 3rd section
360.0
-0.00035/+0.00035 4th section
-0.01/+0.01 3rd section
-0.25/+0.25 1st section
-0.25/+0.25 2nd section
125.0 all sections
4.0 free air all sections
all sections absolute conformity
1 3rd section
-5.0/+5.0 deg angular rotation 3rd section
-2.5/+2.5 4th section
-2.0/+2.0 1st section
-2.0/+2.0 2nd section
-5.0/+5.0 3rd section
stops
10 oclock primary input
11 oclock primary input
8 oclock 12th primary
9 oclock 12th primary
-20.0/+20.0 all sections
65.0 all sections
0.005 dc
6.50 ounces
terminal surfaces gold
gold
70210-805361 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
15 turret
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
3.625" overall length
1. | 200WS-364 | Cage 08815 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.