Serving our customers with quality and safety first.
6
cylindrical servo mounted
not established
1.87400in. and 1.87500in.
0.05700in. and 0.06700in.
1.875in.
0.06000in.
1.995 mils and 2.005 centimeters
0.2494in. and 0.2497in.
0.440in. and 0.480in.
3.630in.
1.99500in. and 2.00500in.
0.08800 mils and 0.09800 centimeters
round
ball
single shaft
350.0
4.00 INCH-Ounces
4.00 INCH-Ounces
0.001in.
0.002in.
0.001in.
0.001in.
0.0008in.
radially positioned over less than half the circumference
clamp ring
5.0 percent, rated amperes c and better finish and 5.0 percent, rated amperes c and better industrial clears and 10.0 percent, rated amperes c and better select and 5.0 percent, rated amperes c and better v.g. stepping and 5.0 percent, rated amperes c drop siding and 10.0 percent, rated amperes c finish
175.0 6th section
350.0
-0.04/+0.04 1st section and -0.10/+0.10 2nd section and -0.10/+0.10 3rd section and -0.10/+0.10 4th section and -0.10/+0.10 5th section and -0.10/+0.10 6th section
-50.0/+50.0 all sections
0.5 7th secondary at 10'30 oclock
all sections absolute conformity
1 6th section
-2.0/+2.0 deg angular rotation 6th section
-5.0/+5.0 1st section and -5.0/+5.0 2nd section and -10.0/+10.0 3rd section and -5.0/+5.0 4th section and -5.0/+5.0 5th section and -5.0/+5.0 6th section
stops
6 oclock 11th primary
125.0 all sections
70210-805101 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
19 turret
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
1. | 805101-2-1 | Cage 64547 |
2. | 302-5006 | Cage 02111 |
3. | 805101-2-1 | Cage 70210 |
4. | 804501-2-1 | Cage 64547 |
5. | 302-5006 | Cage C7407 |
6. | 804501-2-1 | Cage 70210 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.