Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 68A32C316-3 specification
The number of individual elements.
2
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.5620in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0620in.
1.562in.
0.0730in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.750in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.2497in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.625in.
A measurement of the longest dimension of the body,in distinction from width.
0.990in.
1.7500in.
0.0930in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of shaft bearing/s/ furnished.
ball
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
350.0
The maximum amount of turning force required to initiate the actuator movement.
3.00 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
2.00 INCH-Ounces
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.
0.001in.
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.
0.005in.
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.
0.0015in.
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.
0.002in.
The position of the terminal/s/ for making connection to an item.
radially positioned over more than half the circumference
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
20.0 kilohms all sections
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
32.4 1st section and 98.1 1st section and 118.8 1st section and 129.6 1st section and 180.0 1st section and 212.4 1st section and 278.1 1st section and 298.8 1st section and 309.6 1st section
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
5.4 2nd section and 10.8 2nd section and 21.6 2nd section and 54.0 2nd section and 118.0 2nd section and 129.6 2nd section and 180.0 2nd section and 185.4 2nd section and 190.8 2nd section and 201.6 2nd section and 234.0 2nd section and 298.8 2nd section and 309.6 2nd section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.25/+0.25 all sections
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 all sections
The maximum amount of electrical energy that can be expended per section,expressed in watts.
8.0 free air all sections
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
all sections independent linearity
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
13 2nd section
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
9 1st section
The limits of permissible variation from the rated value of the location of a tap per section.
-0.5/+0.5 deg angular rotation all sections
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 all sections
The feature that controls the actuator travel.
stops
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
all sections linear
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
70.0 all sections
Indicates the type and number of terminals for providing electrical connection.
28 turret
Answers.
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-250-7987 RESISTOR,VARIABLE,WIRE WOUND,PRE
- NIIN
- 002507987
- NIIN Date
- 11/19/69
- Schedule B
- 8533390080
- Name Code
- 37408
- FIIG
- A002A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,622.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 68A32C316-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
68A32C316-3 / Resistor,variable,wire wound,preWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
