Serving our customers with quality and safety first.
7
cylindrical servo mounted
not established
2.8750in.
0.0620in.
5.250in. ⁓5-1/4"
2.875in.
0.0730in.
3.031in.
0.2494in. and 0.2497in.
0.625in.
4.500in.
3.0000in.
0.0930in.
round, slotted
ball
double ended shaft
358.0
5.90 INCH-Ounces
3.60 INCH-Ounces
0.0025in.
0.001in.
radially positioned over less than half the circumference
clamp ring
humidity proof
5.0 kilohms all sections
0.0 7th section
345.0 2nd section
345.0 6th section
360.0
-0.25/+0.25 6th section
-0.50/+0.50 2nd section
-0.50/+0.50 3rd section
-0.50/+0.50 7th section
-1.00/+1.00 1st section
-1.00/+1.00 4th section
-1.00/+1.00 5th section
125.0 all sections
-150.0/+150.0 all sections
2.0 free air all sections
all sections absolute conformity
1 2nd section
1 6th section
1 7th section
-1.0/+1.0 3rd section
-5.0/+5.0 1st section
-5.0/+5.0 2nd section
-5.0/+5.0 4th section
-5.0/+5.0 5th section
-5.0/+5.0 6th section
-5.0/+5.0 7th section
continuous motion
10 oclock 12th primary
11 oclock 5th primary
12 oclock 12th primary
8 oclock all primaries
9 oclock 12th primary
cold rolled 12th primary
drawn and pickled 12th primary
40.0 all sections
sections 1, 4, and 5 each have a 5k ohm wiper load; sections 2, 6, and 7 each have a resistance element located across the tap
terminal surfaces gold
gold
10001-2552844 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
24 tab, solder lug
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
sections 1, 4, and 5 each have a 5k ohm wiper load; sections 2, 6, and 7 each have a resistance element located across the tap 5.250" overall length
1. | 402-5025 | Cage 02111 |
2. | NL5713-1479-0 | Cage 73138 |
3. | 300WS278 | Cage 08815 |
4. | 402-5025 | Cage C7407 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.