Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2324954 specification
The number of individual elements.
5
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.3115in. and 1.3120in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0620in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.847in. ⁓3-55/64"
1.438in.
0.0730in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.453in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.750in.
A measurement of the longest dimension of the body,in distinction from width.
3.128in.
A measurement of the longest straight line across a circular cross-sectional plane.
1.453in. ⁓1-29/64"
1.4380in.
0.0930in.
0.125in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round, stepped
Indicates the type of shaft bearing/s/ furnished.
ball
Indicates the type of facility or arrangement provided for moving the variable contact(s).
double ended shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
354.0
The maximum amount of turning force required to initiate the actuator movement.
3.10 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
2.60 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.0025in.
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.
0.001in.
0.375in.
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
10.0 percent, rated amperes c and better v.g. stepping
A measure of the opposition to the flow of direct or alternating current per section.
10.0 percent, rated amperes c drop siding
A measure of the opposition to the flow of direct or alternating current per section.
100.0 percent, rated amperes c and better industrial clears
A measure of the opposition to the flow of direct or alternating current per section.
14.6 percent, rated amperes c and better finish
A measure of the opposition to the flow of direct or alternating current per section.
9.75 percent, rated amperes c and better select
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.15/+0.15 3rd section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.20/+0.20 2nd section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.25/+0.25 1st section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-4.00/+4.00 4th section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-4.00/+4.00 5th section
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 all sections
The maximum amount of electrical energy that can be expended per section,expressed in watts.
2.0 free air all sections
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
all sections independent linearity
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 3rd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-1.0/+1.0 1st section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 2nd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 3rd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 4th section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 5th section
The feature that controls the actuator travel.
continuous motion
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.
7300.0 all sections
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
all sections linear
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
40.0 all sections
Indicates the type and number of terminals for providing electrical connection.
16 tab, solder lug
Answers.
1EA
Schedule B number: 8533390080
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-072-8531 RESISTOR,VARIABLE,WIRE WOUND,PRE
3.847" overall length
- NIIN
- 000728531
- NIIN Date
- 01/01/63
- Schedule B
- 8533390080
- Name Code
- 37408
- FIIG
- A002A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,014.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 170 | Cage 02111 |
| 2. | 749 | Cage 12205 |
| 3. | 170 | Cage C7407 |
Major End Users Countries and entities
- - Italy
Availability for 2324954 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
2324954 / Resistor,variable,wire wound,preWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
