162-20K Pre Wire Wound Variable Resistor

Section Quantity
The number of individual elements.

1

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

cylindrical bushing mounted

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

not established

Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.

0.125in.

Body Diameter
The length of a straight line which passes through the center of the body,and terminates at the circumference.

0.500in.

Shaft Diameter
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

0.0935in.

Shaft Length
A measurement of the longest dimension of the shaft,in distinction from width.

0.406in.

Mounting Bushing Length

0.281in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

1.000in.

Shaft Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.

round, slotted

Shaft Bearing Type
Indicates the type of shaft bearing/s/ furnished.

sleeve

Actuator Type
Indicates the type of facility or arrangement provided for moving the variable contact(s).

single shaft

Maximum Starting Torque
The maximum amount of turning force required to initiate the actuator movement.

0.80 INCH-Ounces

Maximum Running Torque
The maximum amount of force requred to maintain actuator movement.

0.60 INCH-Ounces

Maximum Stop Torque
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.

20.00 INCH-Ounces

Shaft End Play
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.

0.010in.

Shaft Runout
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.

0.003in.

Lateral Runout
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.

0.005in.

Pilot Diameter Runout
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.

0.003in.

Shaft Radial Play
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.

0.003in.

Terminal Location
The position of the terminal/s/ for making connection to an item.

rear end

Mounting Method
The means of attaching the item.

terminal

Electrical Resistance Per Section
A measure of the opposition to the flow of direct or alternating current per section.

20.000 kilohms single section

Function Conformity Tolerance Per Section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.

-0.30/+0.30 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.

125.0 single section

Power Dissipation Rating Per Section In Watts
The maximum amount of electrical energy that can be expended per section,expressed in watts.

2.00 free air single section

Function Conformity Per Section
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.

single section independent linearity

Resistance Tolerance Per Section In Percent
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.

-5.0/+5.0 single section

Function Characteristic Per Section
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.

single section linear

Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
A constant that represents the proportionate change in resistance of the wire per section of which the resistance element of a resistor is wound,expressed in parts per million per degree celsius.

-20.0/+20.0 single section

Ambient Temp In Deg Celsius Per Section At Full Rated Power
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.

-25.0 single section

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

3 pin

162-20K

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 162-20K specification

Answers.

NSN 5905-01-260-7202 RESISTOR,VARIABLE,WIRE WOUND,PRE

Major End Users Countries and entities

Availability for 162-20K A member of our team will provide you with a price and availability quote

Similar by Design Other resistors with similar characteristics

162-20K / Resistor,variable,wire wound,preWhat is the formal definition of this item?