Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1300-566-2 specification
The number of individual elements.
2
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.00000in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.157in. ⁓2-11/64"
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.062in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.120in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.375in.
A measurement of the longest dimension of the body,in distinction from width.
1.344in.
A measurement of the longest straight line across a circular cross-sectional plane.
1.124in. ⁓1-1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
352.0
The maximum amount of force requred to maintain actuator movement.
0.15 INCH-Ounces
The position of the terminal/s/ for making connection to an item.
longitudinally positioned on the circumference
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
100.000 ohms c and better industrial clears
A measure of the opposition to the flow of direct or alternating current per section.
2.000 percent, rated amperes c and better finish
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.25/+0.25 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
2.0 free air single section
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
single section independent linearity
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 1st section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-2.0/+2.0 2nd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 1st section
The feature that controls the actuator travel.
continuous motion
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.
1000.0 single section
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
single section linear
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
40.0 single section
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
2 trimmer res.on section 2
Indicates the type and number of terminals for providing electrical connection.
7 wire lead
Answers.
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-910-6644 RESISTOR,VARIABLE,WIRE WOUND,PRE
2 trimmer res.on section 2 2.157" overall length
- NIIN
- 009106644
- NIIN Date
- 01/01/60
- Schedule B
- 8533390080
- Name Code
- 37408
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 2088531-1 | Cage 27914 |
| 2. | N2088531-1 | Cage 27914 |
| 3. | 2088531-1 | Cage 06845 |
| 4. | N2088531-1 | Cage 06845 |
Major End Users Countries and entities
- - Germany
- - Portugal
Availability for 1300-566-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
1300-566-2 / Resistor,variable,wire wound,preWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
