MS3106E22-10P

MS3106E2210P Plug Electrical Connector

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. MS3106E22-10P specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a and 2b

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand and RIGHT-Hand

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

straight shape, internal coupling w/strain relief

Body Length
A measurement of the longest dimension of the body,in distinction from width.

2.781in.

Overall Diameter
A measurement of the longest straight line across a circular cross-sectional plane.

1.594in. ⁓1-19/32"

Cable Entrance Diameter
The length of a straight line which passes through the center of the cable entrance,and terminates at the circumference.

0.750in.

Threaded Device Type
Indicates the type of threaded device included on the item.

back shell and coupling facility

Mating End Quantity
The number of mating ends provided with the item which are designed to accommodate another connector.

1

Contact Position Arrangement Style
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.

22-10 single mating end

Contact Removability
An indication of whether or not the contact(s) is removable.

nonremovable single mating end single contact grouping

Contact Maximum Current Rating In Amps
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.

22.0 single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.

1250.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.

1750.0 single mating end single contact grouping

Polarization Method
The means used to prevent mismating or cross plugging of contacts.

keyway or multiple keyway

Insert Position In Deg
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.

0.0

Shell Type
Indicates the type of shell included on the item.

solid

Connector Locking Method
The means used to secure a connector to its mating counterpart.

externally threaded shell

Connector Cable Strain Relief Method
The means by which the connector cable is relieved of stress and strain.

cable clamp

Nominal Thread Length
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.375in. and 0.625in.

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

1.188in. and 1.375in. ⁓1-3/8"

Terminal Location
Indicates the location of the terminal/s/ on the item.

back single mating end single contact grouping

Contact Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.

silver single mating end single contact grouping

Insert Material
The chemical compound or mechanical mixture properties of which the insert is fabricated.

plastic melamine single mating end

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

solder well single mating end single contact grouping

Shell Material
The chemical compound or mechanical mixture properties of which the shell is fabricated.

aluminum alloy

Shell Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.

cadmium

Insert Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.

MIL-M-14 mil spec single material response single mating end

Included Contact Quantity
The number of contacts included with the item which provides electrical connection.

4 single mating end single contact grouping

Included Contact Type
Indicates the type of contact(s) included with the item.

round pin single mating end single contact grouping

Precious Material And Location
An indication of the precious material and its location in the item.

contact surfaces silver

Precious Material And Weight
An indication of the precious material contained in the item,and the amount per a measurement scale.

0.004 silver grains, troy

Precious Material
Identification of the precious material contained in the item.

silver

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-C-5015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unef and unef

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

81349-MIL-C-5015 government specification

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unef and unef

What is the thread direction?

Right-hand and right-hand

What is the thread class?

2a and 2b

What is the NSN for MS3106E22-10P?

5935-00-617-6716

How is this classified for shipping?

Schedule B number: 8536695050
Electrical plugs & sockets, for a voltage not exceeding 1,000 v

What's the federal classification of MS3106E22-10P?

FSC 5935 ⁓ Connectors, electrical

Excluding interconnectors, fiber optic

NSN 5935-00-617-6716 CONNECTOR,PLUG,ELECTRICAL

unef thread series right-hand 2a thread class

NIIN
006176716
NIIN Date
01/01/63
Schedule B
8536695050 
Name Code
01938
FIIG
A039B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
Historical Price
$6.80 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Contains silver
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. MILC5015 Cage 81349

Major End Users Countries and entities

  • - Portugal 
  • - Italy 
  • - Turkey 

Availability for MS3106E22-10P A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other connectors with similar characteristics

Nothing similar to this part number was found in our inventory

MS3106E22-10P / Connector,plug,electricalWhat is the formal definition of this item?

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.