05A108WJ24PC Plug Electrical Connector

Datasheet. 05A108WJ24PC specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

straight shape, internal coupling

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.234in. ⁓1-15/64"

Overall Diameter
A measurement of the longest straight line across a circular cross-sectional plane.

1.875in. ⁓1-7/8"

Environmental Protection
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.

moisture proof and salt water resistant and vibration proof and corrosion resistant and dust resistant and fuel resistant and fungus resistant and humidity resistant and oil resistant and shock resistant and thermal shock resistant and vibration resistant

Threaded Device Type
Indicates the type of threaded device included on the item.

coupling facility

Mating End Quantity
The number of mating ends provided with the item which are designed to accommodate another connector.

Contact Position Arrangement Style
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.

24-24 single mating end

Contact Removability
An indication of whether or not the contact(s) is removable.

removable single mating end all contact groupings

Polarization Method
The means used to prevent mismating or cross plugging of contacts.

key, multiple key groove

Insert Position In Deg
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.

0.0 and 140.0 and 200.0 and 257.0

Shell Type
Indicates the type of shell included on the item.

solid

Connector Locking Method
The means used to secure a connector to its mating counterpart.

internally threaded coupling ring

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

B-2 bomber

Nominal Thread Length
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

7.11 mm and 0.280in.

Operating Temp Rating
The temperature at which the item operates.

-65.0 deg celsius and 175.0 deg celsius

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

37.0 mm

Terminal Location
Indicates the location of the terminal/s/ on the item.

back single mating end all contact groupings

Contact Material
The chemical compound or mechanical mixture properties of which the contact is fabricated.

copper alloy single mating end all contact groupings

Contact Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.

gold single mating end all contact groupings

Insert Material
The chemical compound or mechanical mixture properties of which the insert is fabricated.

gold single mating end

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

solder well single mating end all contact groupings

Shell Material
The chemical compound or mechanical mixture properties of which the shell is fabricated.

aluminum alloy

Shell Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.

cadmium

Shell Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.

QQ-P-416 fed spec single treatment response

Thread Tolerance Class
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.

6g internal

Included Contact Quantity
The number of contacts included with the item which provides electrical connection.

12 single mating end 1st contact grouping

Included Contact Quantity
The number of contacts included with the item which provides electrical connection.

12 single mating end 2nd contact grouping

Included Contact Type
Indicates the type of contact(s) included with the item.

round pin single mating end all contact groupings

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

shell to shell conductivity shall be one milliohm

Precious Material And Location
An indication of the precious material and its location in the item.

contact surfaces gold

Precious Material
Identification of the precious material contained in the item.

gold

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-D38999 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 76823-05A108 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

iso m and special acme

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

MIL-C-38999 government specification

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Iso m and special acme

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for 05A108WJ24PC?

5935-01-477-1497

How is this classified for shipping?

Schedule B number: 8536695050
Electrical plugs & sockets, for a voltage not exceeding 1,000 v

What's the federal classification of 05A108WJ24PC?

FSC 5935 ⁓ Connectors, electrical

Excluding interconnectors, fiber optic

05A108WJ24PC

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 05A108WJ24PC specification

Answers.

NSN 5935-01-477-1497 CONNECTOR,PLUG,ELECTRICAL

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for 05A108WJ24PC A member of our team will provide you with a price and availability quote

Similar by Design Other connectors with similar characteristics

05A108WJ24PC / Connector,plug,electricalWhat is the formal definition of this item?