Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 05A108WF35PN specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand and RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, internal coupling
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
31.0 mm
A measurement of the longest straight line across a circular cross-sectional plane.
38.5 mm
Indicates the type of threaded device included on the item.
back shell and coupling facility
The number of mating ends provided with the item which are designed to accommodate another connector.
1
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
19-35 single mating end
An indication of whether or not the contact(s) is removable.
removable single mating end single contact grouping
The means used to prevent mismating or cross plugging of contacts.
keyway or multiple keyway
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.
0.0
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
internally threaded coupling nut
The national stock number or the identification information of the end equipment for which the item is a part.
B-2 bomber, aircraft cen sec
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.219in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
10
A designation that is used for the purpose of general identification of the thread.
28.0 mm and 1.250in.
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.00
Indicates the location of the terminal/s/ on the item.
back single mating end single contact grouping
The chemical compound or mechanical mixture properties of which the contact is fabricated.
copper alloy single mating end single contact grouping
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
gold single mating end single contact grouping
Indicates the type of terminal for providing electrical connection to the item.
crimp single mating end single contact grouping
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
cadmium
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.
6g external
The number of contacts included with the item which provides electrical connection.
66 single mating end single contact grouping
Indicates the type of contact(s) included with the item.
round pin single mating end single contact grouping
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
shell to shell conductivity shall be one milliohm
An indication of the precious material and its location in the item.
contact surfaces gold
Identification of the precious material contained in the item.
gold
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-D38999 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 76823-05A108 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso m and special acme
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-38999 government specification
Answers.
1EA
Iso m and special acme
10
Right-hand and right-hand
2b
Schedule B number: 8536695050
Electrical plugs & sockets, for a voltage not exceeding 1,000 v
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-478-1005 CONNECTOR,PLUG,ELECTRICAL
Used on b-2 bomber, aircraft cen sec. iso m thread series shell to shell conductivity shall be one milliohm 10 thread quantity per inch 31.0mm overall length right-hand 2b thread class
- NIIN
- 014781005
- NIIN Date
- 08/30/00
- Schedule B
- 8536695050
- Name Code
- 01938
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $144.03 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 05A108 | Cage 76823 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 05A108WF35PN A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
05A108WF35PN / Connector,plug,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.
