M83421-01-6173P Paper Metallized Fixed Capacitor

Datasheet. M83421-01-6173P specification

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

w/o mtg facilities, axial terminals

Mil-std-1276 Wire Lead Type Designator
Indicates the type designator,per mil-std-1276,of the detail requirements of leads used on electronic components.

N-2

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

established

Reliability Failure Rate Level In Percent
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

0.1000

Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.

1.625in.

Body Diameter
The length of a straight line which passes through the center of the body,and terminates at the circumference.

0.223in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

0.687in.

Terminal Diameter
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

0.025in.

Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

no common or grounded electrode (s)

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

hermetically sealed case

Insulation Resistance At Maximum Operating Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.

10000.0 megohms

Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

0.100 microfarads single section

Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.

-65.0 deg celsius and 100.0 deg celsius

Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

30.0 dc single section

Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.

-5.00/+5.00 percent single section

Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.

metal

Insulation Resistance At Reference Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

1000000.0 megohms

Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.

0.1500

Case Insulation Material
The chemical compound or mechanical mixture properties of which the case insulation is fabricated.

plastic

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-C-83421 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

2 uninsulated wire lead

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

81349-MIL-C-83421/1 government specification

Answers.

What quantity is this sold in?

1EA

What is the NSN for M83421-01-6173P?

5910-01-036-5151

How is this classified for shipping?

Schedule B number: 8532290040
Fixed capacitors

What's the federal classification of M83421-01-6173P?

FSC 5910 ⁓ Capacitors

Excluding semiconductor devices and associated hardware.

M83421-01-6173P

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. M83421-01-6173P specification

Answers.

NSN 5910-01-036-5151 CAPACITOR,FIXED,METALLIZED,PAPER

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for M83421-01-6173P A member of our team will provide you with a price and availability quote

Similar by Design Other capacitors with similar characteristics

M83421-01-6173P / Capacitor,fixed,metallized,paperWhat is the formal definition of this item?