Serving our customers with quality and safety first.
1
rectangular w/mounting holes/slots
1.310in. ⁓1-5/16"
0.300in. and 0.320in.
0.210in. and 0.230in.
0.087in.
0.050in. and 0.070in.
0.090in. and 0.110in.
1.240in. and 1.260in.
0.210in. and 0.230in.
0.300in. and 0.320in.
round, slotted
single shaft
9000.0
7.00 INCH-Ounces
10.0
0.995in. and 1.005in.
2
rear end
unthreaded hole
100.000 ohms single section
9000.0
135.0 single section
-100.0/+100.0 single section
0.8 free air single section
-5.0/+5.0 single section
clutch
70.0 single section
a single section
05257-X900401 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
3 tab, solder lug
0.210 inches minimum and 0.230 inches maximum
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
0.210" overall width 1.310" overall length
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.