Serving our customers with quality and safety first.
1
rectangular w/mounting holes
established
0.100
0.187in.
0.073 mils and 0.083 centimeters
0.058in. and 0.098in.
0.045in.
0.490in. and 0.510in.
0.230in.
0.490in. and 0.510in.
round, slotted
bearing
single shaft
8280.0 and 13680.0
10.00 INCH-Ounces
10.00 INCH-Ounces
0.195in. and 0.205in.
moderately rugged
0.513in. and 0.526in.
2
right adjacent side two rows
unthreaded hole
0.095in. and 0.105in.
humidity proof
0.052 cubicin.
20.000 percent, rated amperes c and better flooring
8280.0 and 13680.0
0.095 mils and 0.105 centimeters
175.0 single section
-50.0/+50.0 single section
1.0 7th secondary quality
-5.0/+5.0 single section
clutch
70.0 single section
a single section
terminal surfaces gold
gold
81349-MIL-R-39015 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
3 pin
81349-MIL-R-39015/2 government specification
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
1. | M39015/2-008PM | Cage 81349 |
2. | 641-DP203M-3 | Cage 83298 |
3. | M39015/2-008PP | Cage 81349 |
4. | MILR39015-2 | Cage 81349 |
5. | RTR22DP203P | Cage 81349 |
6. | 966034-25 | Cage 94580 |
7. | 5091-20K | Cage 91637 |
8. | 3250P501-203 | Cage 80294 |
9. | 148029-1REVL | Cage 00752 |
10. | 3250P01-203 | Cage 80244 |
11. | 2900P-203 | Cage 96791 |
12. | M39015-02-008PP | Cage 81349 |
13. | RTR22DP203M | Cage 81349 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.