Serving our customers with quality and safety first.
1
rectangular w/mounting holes/slots
not established
1.023in. and 1.075in. ⁓1-5/64"
0.469in. and 0.531in.
0.295in. and 0.335in.
0.639in. and 0.721in.
0.088in. and 0.098in.
0.100in. and 0.130in.
0.035in. and 0.065in.
0.990in. and 1.010in.
0.170in. and 0.190in.
0.295in. and 0.335in.
round, slotted
fully cw
single shaft
4320.0 and 6480.0
8.00 INCH-Ounces
0.590in. and 0.610in.
0.745in. and 0.755in.
2
rear end
unthreaded hole
0.100in.
nonmetallic shaft
2.0 kilohms single section
4320.0 and 6480.0
0.160in. and 0.180in.
150.0 single section
-50.0/+50.0 single section
0.8 free air single section
-5.0/+5.0 single section
stops
85.0 single section
a single section
81349-MIL-R-27208 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
3 pin
81349-MIL-R-27208/2 government specification
1EA
0.639 inches minimum and 0.721 inches maximum
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
0.639" overall width 1.023" overall length
1. | MILR27208-2 | Cage 81349 |
2. | DMS85017B | Cage 16236 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.