Serving our customers with quality and safety first.
1
rectangular w/mounting holes
not established
0.515in. and 0.555in. ⁓9/16"
6.000in.
0.490in. and 0.510in.
0.182in. and 0.197in.
0.090in. and 0.098in.
0.058in. and 0.098in.
0.025in. and 0.045in.
0.490in. and 0.510in.
0.182in. and 0.197in.
0.490in. and 0.510in.
round, slotted
fully cw
single shaft
7200.0 and 16200.0
8.00 INCH-Ounces
0.200in.
0.513in. and 0.526in.
2
rear end
unthreaded hole
2.000 kilohms single section
7200.0 and 16200.0
0.100in.
150.0 single section
-50.0/+50.0 single section
0.75 free air single section
-5.0/+5.0 single section
stops
85.0 single section
a single section
3 pin
1EA
0.182 inches minimum and 0.197 inches maximum
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
0.182" overall width 0.515" overall length
1. | MILR27208-2 | Cage 81349 |
2. | 381-0389-050 | Cage 13499 |
3. | 381-0389-050 | Cage 95105 |
4. | 412-1959 | Cage A486G |
5. | DMS 85017B | Cage 16236 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.