Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. R50D8297 specification
The number of individual elements.
5
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.87500in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.06200in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.313in. ⁓3-21/64"
0.838in. and 0.938in.
0.06200in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.985in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.438in.
A measurement of the longest dimension of the body,in distinction from width.
1.875in.
A measurement of the longest straight line across a circular cross-sectional plane.
2.293in. ⁓2-19/64"
1.98500in.
0.06200in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of shaft bearing/s/ furnished.
bearing
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
343.0 and 343.0 and 343.0 and 343.0 and 350.0
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
17.700 percent, rated amperes c and better v.g. stepping
A measure of the opposition to the flow of direct or alternating current per section.
50.000 percent, rated amperes c and better finish
A measure of the opposition to the flow of direct or alternating current per section.
50.000 percent, rated amperes c and better industrial clears
A measure of the opposition to the flow of direct or alternating current per section.
50.000 percent, rated amperes c and better select
A measure of the opposition to the flow of direct or alternating current per section.
50.000 percent, rated amperes c drop siding
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-2.00/+1.00 4th section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-5.00/+5.00 1st section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-5.00/+5.00 2nd section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-5.00/+5.00 3rd section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.0 7th secondary switch
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.5 7th secondary finish
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.5 7th secondary grams
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.5 7th secondary pattern
The maximum amount of electrical energy that can be expended per section,expressed in watts.
4.0 7th secondary inserted tab
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
all sections independent linearity
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 all sections
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 1st section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 2nd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 3rd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 4th section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 5th section
The feature that controls the actuator travel.
continuous motion
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.
25000.0 all sections
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
all sections graph
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
40.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a all sections
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.5 watt, ambient temp 70 deg c at 2.0 watt
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
79500-59-J-204 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) and 79500-52-C-2444 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Indicates the type and number of terminals for providing electrical connection.
18 turret
Answers.
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-335-0429 RESISTOR,VARIABLE,WIRE WOUND,NON
ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.75 watt, ambient temp 70 deg c at 0.5 watt, ambient temp 70 deg c at 2.0 watt 3.313" overall length
- NIIN
- 003350429
- NIIN Date
- 01/01/63
- Schedule B
- 8533390080
- Name Code
- 37406
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Spain
- - Greece
- - Turkey
Availability for R50D8297 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
R50D8297 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
