Serving our customers with quality and safety first.
1
rectangular w/mounting holes
not established
0.490in. and 0.510in. ⁓33/64"
0.170in. and 0.210in.
0.490in. and 0.510in.
0.445in.
0.070in. and 0.076in.
0.092in. and 0.097in.
0.058in. and 0.085in.
0.490in. and 0.510in.
0.250in. and 0.265in.
0.490in. and 0.510in.
round
single shaft
7.50 INCH-Ounces
0.200in.
0.520in.
2
left adjacent side single row
unthreaded hole
50.000 kilohms single section
9000.0
0.095in. and 0.105in.
150.0 single section
-70.0/+70.0 single section
1.0 free air single section
-5.0/+5.0 single section
stops
50.0 single section
a single section
O-Ring seal around shaft required. device may be silicone filled
3 pin
1EA
0.445 inches
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
o-ring seal around shaft required. device may be silicone filled 0.445" overall width 0.490" overall length
1. | 503/4/04613/006 | Cage K2523 |
2. | 3250P-67-503 | Cage 80294 |
3. | 301-102H50K | Cage 94271 |
4. | CT200-11-50K | Cage 75042 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.