Serving our customers with quality and safety first.
1
rectangular w/bushing
not established
0.124in. and 0.126in.
0.500in.
0.250in.
1.340in. and 1.402in.
0.079in.
0.615in. and 0.645in.
0.615in. and 0.645in.
round, hollowed
double ended shaft
3600.0
3.00 INCH-Ounces
3.00 INCH-Ounces
rugged
0.250in.
unef
32.0
lower adjacent side two rows
standard bushing w/shaft seal
500.0 ohms single section
3600.0
125.0 single section
-50.0/+50.0 single section
1.0 free air single section
-5.0/+5.0 single section
stops
70.0 single section
a single section
one 0.250 in. 32 thd bushing on rear shaft also
0.75 ounces
3 tab, solder lug
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
one 0.250 in. 32 thd bushing on rear shaft also
1. | 311-2010-00 | Cage 80009 |
2. | 84C1D-Z16-BA0291 | Cage 32997 |
3. | 311-2010-00 | Cage 80009 |
4. | 84C1D-Z16-BA0291 | Cage 32997 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.