7300-200 Non Wire Wound Variable Resistor

Section Quantity
The number of individual elements.

1

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

cylindrical bushing mounted

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

established

Reliability Failure Rate Level In Percent
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

0.001

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

2.500in. ⁓2-1/2"

Shaft Diameter
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

0.250in.

Shaft Length
A measurement of the longest dimension of the shaft,in distinction from width.

0.500in.

Mounting Bushing Length

0.375in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

1.500in.

Overall Diameter
A measurement of the longest straight line across a circular cross-sectional plane.

0.750in. ⁓3/4"

Shaft Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.

round, slotted

Actuator Type
Indicates the type of facility or arrangement provided for moving the variable contact(s).

single shaft

Effective Electrical Rotation In Deg Angular Rotation
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.

3600.0

Maximum Starting Torque
The maximum amount of turning force required to initiate the actuator movement.

2.00 INCH-Ounces

Maximum Stop Torque
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.

100.00 INCH-Ounces

Screw Thread Diameter
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.

0.375in.

Screw Thread Series Designator
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unef

Screw Thread Quantity Per Inch
The number of screw threads on the item per linear inch measured on a line parallel to the thread axis,including incomplete threads.

32.0

Terminal Location
The position of the terminal/s/ for making connection to an item.

rear end

Mounting Method
The means of attaching the item.

standard bushing

Electrical Resistance Per Section
A measure of the opposition to the flow of direct or alternating current per section.

200.000 ohms single section

Rotary Actuator Travel In Angular Deg
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.

3600.0

Function Conformity Tolerance Per Section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.

-0.50/+0.50 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.

85.0 single section

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.

-70.0/+70.0 single section

Power Dissipation Rating Per Section In Watts
The maximum amount of electrical energy that can be expended per section,expressed in watts.

2.0 free air single section

Function Conformity Per Section
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.

single section independent linearity

Resistance Tolerance Per Section In Percent
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.

-5.0/+5.0 single section

Actuator Travel Control Feature
The feature that controls the actuator travel.

continuous motion

Function Characteristic Per Section
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.

single section linear

Ambient Temp In Deg Celsius Per Section At Full Rated Power
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.

40.0 single section

Standard Taper Curve Per Section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.

a single section

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

3 binding post

7300-200

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 7300-200 specification

Answers.

NSN 5905-00-283-6250 RESISTOR,VARIABLE,WIRE WOUND,NON

Major End Users Countries and entities

Availability for 7300-200 A member of our team will provide you with a price and availability quote

Similar by Design Other resistors with similar characteristics

7300-200 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?