Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6538S79502 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
0.7495in. and 0.7500in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0620in.
0.780in.
0.0620in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
0.875in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.1245in. and 0.1248in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.500in.
A measurement of the longest dimension of the body,in distinction from width.
0.475in.
0.8750in.
0.0620in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
340.0
The maximum amount of turning force required to initiate the actuator movement.
0.25 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
0.25 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.00500in.
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.
0.001in.
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.
0.00250in.
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.
0.003in.
The maximum difference of shaft position that occurs when the shaft is moved to the same actual output ratio point from opposite directions,expressed in degree angular rotation.
0.1
The position of the terminal/s/ for making connection to an item.
rear end
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
5.000 kilohms single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 single section
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-500.0/+5.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.0 free air single section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 single section
The feature that controls the actuator travel.
continuous motion
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
70.0 single section
Indicates the type and number of terminals for providing electrical connection.
3 turret
Answers.
Schedule B number: 8533390080
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-245-6410 RESISTOR,VARIABLE,WIRE WOUND,NON
- NIIN
- 012456410
- NIIN Date
- 12/03/86
- Schedule B
- 8533390080
- Name Code
- 37406
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
Availability for 6538S79502 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
6538S79502 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
