Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 55-25-947 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.9370in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0320in.
1.938in. and 1.939in.
0.1200in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
2.000in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.250in.
A measurement of the longest dimension of the body,in distinction from width.
0.974in.
2.0000in.
0.0750in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of shaft bearing/s/ furnished.
ball
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
360.0
The maximum amount of turning force required to initiate the actuator movement.
0.60 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
0.60 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.00600in.
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
clamp ring
Those features,not otherwise specified,which may be required for proper functioning of the item.
pressure mounted tap
A measure of the opposition to the flow of direct or alternating current per section.
20.000 kilohms single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-3.00/+3.00 single section
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
80.0 single section
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-20.0/+20.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
4.0 free air single section
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
single section independent linearity
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 single section
The feature that controls the actuator travel.
continuous motion
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
single section linear
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
25.0 single section
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
nine taps supplied and mounted at time of procurement; shaft has a female coupling unit that attaches when in use
Indicates the type and number of terminals for providing electrical connection.
12 turret
Answers.
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-919-4254 RESISTOR,VARIABLE,WIRE WOUND,NON
nine taps supplied
- NIIN
- 009194254
- NIIN Date
- 08/01/66
- Schedule B
- 8533390080
- Name Code
- 37406
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MPG-32-2002 | Cage 24017 |
| 2. | R438882-4 | Cage 04071 |
Major End Users Countries and entities
- - Canada
Availability for 55-25-947 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
55-25-947 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
