Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 413250-6 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
rectangular w/mounting holes
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
established
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
0.100
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.535in. ⁓35/64"
A measurement of the longest dimension of a terminal,in distinction from width.
6.000in.
The distance measured in a straight line from the bottom to the top of an item.
0.500in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.182in. and 0.197in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.090in. and 0.098in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.035in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.078in.
A measurement of the longest dimension of the body,in distinction from width.
0.500in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.182in. and 0.197in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.500in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round, slotted
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
0.513in. and 0.526in.
The number of mounting facilities provided.
2
The position of the terminal/s/ for making connection to an item.
rear end
The means of attaching the item.
unthreaded hole
A measure of the opposition to the flow of direct or alternating current per section.
5.000 kilohms single section
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
150.0 single section
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-50.0/+50.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
0.75 free air single section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 single section
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
85.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a single section
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MILR39015/2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
3 wire lead
Answers.
1EA
0.182 inches minimum and 0.197 inches maximum
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-271-7421 RESISTOR,VARIABLE,WIRE WOUND,NON
0.182" overall width 0.535" overall length
- NIIN
- 002717421
- NIIN Date
- 07/28/73
- Schedule B
- 8533390080
- Name Code
- 37406
- FIIG
- A002A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $22.73 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- Has ESD sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | M39015/02-006LP | Cage 81349 |
| 2. | RT22C2L502 | Cage 81349 |
| 3. | M39015/2-006LP | Cage 81349 |
| 4. | MIL-R-39015-2 | Cage 81349 |
| 5. | RTR22DL502P | Cage 81349 |
| 6. | 11141-0046 | Cage 27914 |
| 7. | 4005692-7 | Cage 07187 |
| 8. | 3250L501-502 | Cage 80294 |
| 9. | 533199-22 | Cage 96214 |
| 10. | 1450022-2 | Cage 93346 |
| 11. | 381-0007-110 | Cage 95105 |
| 12. | 3255L502 | Cage 32997 |
| 13. | 325L-1-502 | Cage 32997 |
| 14. | 381-1721-120 | Cage 94987 |
| 15. | 3250L466-502 | Cage 80294 |
| 16. | 576R671H47 | Cage 97942 |
| 17. | 300-00HS5K0HMS | Cage 94271 |
| 18. | 300-00HS5K0HMS | Cage 0EBU2 |
| 19. | M39015/2-006LM | Cage 81349 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - U.s. Marine Corps
- - Department of The Air Force
- - U.s. Coast Guard
- - National Weather Service
- - Austria
- - Poland
- - Brazil
- - Spain
- - Israel
- - Taiwan, Province of China
- - Singapore
- - Malaysia
- - Australia
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
- - Nato Maintenance And Supply Agency
Availability for 413250-6 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- Electrostatic sensitive device (esd)
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
413250-6 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
