Serving our customers with quality and safety first.
1
cylindrical bushing mounted
not established
1.490in. ⁓1-1/2"
1.000in.
0.250in.
0.810in.
0.248in.
0.680in.
1.130in. ⁓1-9/64"
round
sleeve
single shaft
1800.0
0.60 INCH-Ounces
0.60 INCH-Ounces
48.00 INCH-Ounces
0.290in.
1.0
oliver perry class ffg; kidd class ddg; ticonderoga class cg (47) ; catapult/arresting gear; spruance class dd (963) ; arleigh burke class ddg; recovery assist, securing and travering (rast) ; system; helicopter landing system, lamps mk iii
0.375in.
unef
32.0
radially positioned over less than half the circumference
standard bushing
nonmetallic shaft
1.0 kilohms single section
1800.0
125.0 single section
1.5 free air single section
-3.0/+3.0 single section
stops
feat
-20.0/+20.0 single section
70.0 single section
a single section
weapon system essential
30003-67A58A59 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
3 tab, solder lug
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
Used on oliver perry class ffg; kidd class ddg; ticonderoga class cg (47); catapult/arresting gear; spruance class dd (963); arleigh burke class ddg; recovery assist, securing and travering (rast); system; helicopter landing system, lamps mk iii. weapon system essential 1.490" overall length
1. | 3520S1-102 | Cage 80294 |
2. | 6542C118 | Cage 80020 |
3. | 6542C118-1 | Cage 80020 |
4. | 535-1-1-102 | Cage 02111 |
5. | 67A58A59 | Cage 30003 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.