Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1960923-1 specification
The number of individual elements.
4
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
0.9688in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0620in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.951in. ⁓2-61/64"
1.625in.
0.0730in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.761in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.1247in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.625in.
A measurement of the longest dimension of the body,in distinction from width.
1.901in.
A measurement of the longest straight line across a circular cross-sectional plane.
2.218in. ⁓2-7/32"
1.7500in.
0.0930in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round, slotted
Indicates the type of shaft bearing/s/ furnished.
ball
Indicates the type of facility or arrangement provided for moving the variable contact(s).
double ended shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
165.0
The maximum amount of turning force required to initiate the actuator movement.
2.10 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.00500in.
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
clamp ring
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
7.345 cubicin.
A measure of the opposition to the flow of direct or alternating current per section.
1.0 gallons per minute c and better select
A measure of the opposition to the flow of direct or alternating current per section.
100.0 percent, rated amperes c and better finish
A measure of the opposition to the flow of direct or alternating current per section.
100.0 percent, rated amperes c and better industrial clears
A measure of the opposition to the flow of direct or alternating current per section.
5.0 percent, rated amperes c and better v.g. stepping
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
67.23 1st section
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
67.23 2nd section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.30/+0.30 all sections
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 all sections
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-20.0/+20.0 all sections
The maximum amount of electrical energy that can be expended per section,expressed in watts.
2.0 free air all sections
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
all sections absolute conformity
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 1st section
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 2nd section
The limits of permissible variation from the rated value of the location of a tap per section.
-10.0/+10.0 deg angular rotation 1st section
The limits of permissible variation from the rated value of the location of a tap per section.
-10.0/+10.0 deg angular rotation 2nd section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 all sections
The feature that controls the actuator travel.
continuous motion
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
all sections table
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
85.0 all sections
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
rear shaft length is 0.375in. , diameter is 0.1247in.
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
55972-1960923 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Indicates the type and number of terminals for providing electrical connection.
14 turret
Answers.
1EA
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-243-8119 RESISTOR,VARIABLE,WIRE WOUND,NON
rear shaft length is 0.375" , diameter is 0.1247" 2.951" overall length
- NIIN
- 002438119
- NIIN Date
- 03/10/71
- Schedule B
- 8533390080
- Name Code
- 37406
- FIIG
- A002A0
- Item Weight
- 0.300lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,391.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- Has ESD sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 4740 | Cage 04454 |
| 2. | 4740 | Cage 04454 |
| 3. | 4740 | Cage 04454 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for 1960923-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- Electrostatic sensitive device (esd)
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
1960923-1 / Resistor,variable,wire wound,nonWhat is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
