Serving our customers with quality and safety first.
1
rectangular w/mounting holes/slots
not established
1.320in. ⁓1-21/64"
0.995in. and 1.005in.
0.180in. and 0.290in.
0.086in.
0.105in. and 0.141in.
0.031in. and 0.080in.
1.225in. and 1.260in.
0.180in. and 0.290in.
0.296in. and 0.328in.
round, slotted
single shaft
5.00 INCH-Ounces
0.995in. and 1.005in.
2
rear end
unthreaded hole
nonmetallic shaft
500.000 ohms single section
7920.0
175.0 single section
1.0 free air single section
-5.0/+5.0 single section
clutch
-20.0/+20.0 single section
70.0 single section
a single section
3 wire lead
1EA
0.180 inches minimum and 0.290 inches maximum
Schedule B number: 8533390080
nmfc 062960
Wirewound variable resistors
FSC 5905 ⁓ Resistors
Excluding resistance wire.
0.180" overall width 1.320" overall length
1. | 05-507950 | Cage 3CPE0 |
2. | 42-1-10-501 | Cage 02111 |
3. | 224P1-501J | Cage 80294 |
4. | 1697-501 | Cage 91637 |
5. | 10015458-020 | Cage 18876 |
6. | BACR14AL501 | Cage 81205 |
7. | 381-1284-000 | Cage 95105 |
8. | 42-1-10-501 | Cage C7407 |
9. | 05-507950 | Cage 31435 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.