Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. TDH-8051-2001S specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.718in. ⁓1-23/32"
The distance measured in a straight line from the bottom to the top of an item.
1.010in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.025in.
The minimum and maximum limits of temperature at which the item is rated for operation.
-55.0/+125.0 deg celsius
The national stock number or the identification information of the end equipment for which the item is a part.
an FPS-123
The value(s) of potential for which the item is rated.
20.0 volts contact and 30.0 volts contact
The designation that identifies the schematic diagram of the contact configuration.
double pole, double throw
The amount of current for which the item is designed.
150.00 milliamperes control
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
200.00 milliseconds fall
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
contact rating (amps per pole) 28 vdc 115/200 vac, 400hz. spike transients +/- 600v, 10 microsecond max. positive transients 80v, per MIL-STD-704A
Indicates the type and number of terminals for providing electrical connection.
14 wire hook
Answers.
1EA
1.025 inches maximum
Schedule B number: 8536490055
nmfc 061300
Relays, except electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-509-6351 RELAY,HYBRID
Used on an fps-123. contact rating (amps per pole) 28 vdc 115/200 vac, 400hz. spike transients +/- 600v, 10 microsecond max. positive transients 80v, per mil-std-704a 1.025" overall width 1.718" overall length
- NIIN
- 015096351
- NIIN Date
- 06/27/03
- Schedule B
- 8536490055
- Name Code
- 31445
- FIIG
- A513L0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $829.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for TDH-8051-2001S A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
TDH-8051-2001S / Relay,hybridWhat is the formal definition of this item?
A self-contained device that performs the function of opening or closing an electrical circuit in response to electrical changes in an external circuit. it consists of a combination of semiconductor and passive circuit devices, which in turn control an integral electro-magnetic relay. excludes relays which employ diodes, rectifiers or other passive devices to achieve contact protection or coil modification. excludes relay, solid state.
