capacitor, fixed, polypropylene; 171 series metallized polypropylene/ radial leads low leakage; radial leaded; non inductively wound; non-polar; flame retardant case meets UL94v-0; epoxy encapsulant meets UL94v-0; lead material thinned copper wire lead content 5%; voltage range 160vdc to 630vdc; operating temperature -55 deg c to +105 deg c with voltage derating above 85 deg c
metallized energy storage capacitor type 681p; capacitor, fixed, polyester hermetically sealed cylindrical case with single ceramic pillar insulator (case grounded) or with 2 ceramic pillar insulators (case insulated) on 2in diameter or larger cases; designed for use at discharge rates of up to 10 per second
Used on c47531-007(19156), antenna, tacan, all-band and ca70608-001(19156), receiver-transmitter. capacitor, thin film chip terminal finish is nickel with a tin or tin/lead coating.
Used on c47531-007(19156), antenna, tacan, all-band and ca70608-001(19156), receiver-transmitter. capacitor, thin film chip terminal finish is nickel with a tin or tin/lead coating.
Used on c47531-007(19156), antenna, tacan, all-band and ca70608-001(19156), receiver-transmitter. capacitor, thin film chip terminal finish is nickel with a tin or tin/lead coating.
Used on c47531-007(19156), antenna, tacan, all-band and ca70608-001(19156), receiver-transmitter. capacitor, thin film chip termination finish is nickel with a tin or tin/lead coating.
Used on c47531-007(19156), antenna, tacan, all-band and ca70608-001(19156), receiver-transmitter. capacitor, thin film chip termination finish is nickel with a tin or tin/lead coating.
Used on 6115-01-547-8513 power plant,utility. dc link film capacitors 25uf 300 volts 10 percent 37.5mml/s 1.0mm l/d capacitance:25 uf, tolerance:10 percent, votage rating:300v, esr:4.6 ohms, termination style:radial, lead spacing:37.5mm, operating temp:M55.0c to P85.0c
conductive polymer chip capacitor polymer cathode technology; low esr; high frequency cap retention; no ignition failure mode; use up to 90% of rated voltage (10% derating) for part types greater or less than 10 volts; halogen free epoxy; 100% accelerated steady state aging; volumetrically efficient; voltage 2v to 25v
