Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M39018/04-2119M specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
w/o mtg facilities, terminal (s) on one endw/o mtg facilities, terminal (s) on one endw/o mtg facilities, terminal (s) on one end
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
establishedestablishedestablished
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
1.00001.00001.0000
A measurement of the longest dimension of a terminal,in distinction from width.
0.281in. 0.281in. 0.281in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
2.532in.
A measurement of the longest dimension of the body,in distinction from width.
5.157in.
The center to center distance between terminals parallel to the diameter of the item.
1.125in.
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.
0.190in.
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
no common or grounded electrode (s)
The total opposition offered to the flow of an alternating or pulsating current,expressed at minimum operating temperature in ohms.
0.13
An indication of whether or not the item normally will accept flow of current in one direction only.
polarized
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
34000.000 microfarads single section
The temperature/s/ at which an item can function without voltage derating.
-55.0 deg celsius and 85.0 deg celsius
Stray direct current of relatively small value which flows through the item when voltage is impressed across it,measured at maximum operating temperature.
8.88 milliamperes
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
30.0 dc single section
The limits of permissible deviation per section of a measured value from a specified value.
-10.00/+50.00 percent single section
The chemical compound or mechanical mixture properties of which the case is fabricated.
metal
The chemical compound or mechanical mixture properties of which the capacitive electrode is fabricated.
aluminum
All internal series resistances concentrated or lumped at one point in the circuit and treated as one resistance,measured at reference temperature in ohms.
0.012
Stray direct current of relatively small value flows through the capacitor when voltage is impressed across it,measured at reference temperature.
1.480 milliamperes
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.
solder
The chemical compound or mechanical mixture properties of which the case insulation is fabricated.
plastic
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-3018 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
2 threaded hole
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-39018/4 government specification
Answers.
Schedule B number: 8532290040
Fixed capacitors
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-01-203-5647 CAPACITOR,FIXED,ELECTROLYTIC
- NIIN
- 012035647
- NIIN Date
- 03/15/85
- Schedule B
- 8532290040
- Name Code
- 00008
- FIIG
- A010B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-C-39018/4 | Cage 81349 |
| 2. | M39018-04-1119 | Cage 81349 |
Availability for M39018/04-2119M A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
M39018/04-2119M / Capacitor,fixed,electrolyticWhat is the formal definition of this item?
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.
