M39006-09-6324 Fixed Electrolytic Capacitor

Datasheet. M39006-09-6324 specification

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

w/o mtg facilities, axial terminals

Mil-std-1276 Wire Lead Type Designator
Indicates the type designator,per mil-std-1276,of the detail requirements of leads used on electronic components.

AN-3 and c

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

established

Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.

2.250in.

Body Diameter
The length of a straight line which passes through the center of the body,and terminates at the circumference.

0.312in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

0.719in.

Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

electrode (s) grounded to case, w/gnd terminal

Anode Type
The general construction and/or form of the anode material.

solid

Impedance At Minimum Operating Temp In Ohms
The total opposition offered to the flow of an alternating or pulsating current,expressed at minimum operating temperature in ohms.

70.0

Electrical Polarization
An indication of whether or not the item normally will accept flow of current in one direction only.

polarized

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

hermetically sealed case

Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

47.000 microfarads single section

Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.

-55.0 deg celsius and 85.0 deg celsius

Dc Leakage At Maximum Operating Temp
Stray direct current of relatively small value which flows through the item when voltage is impressed across it,measured at maximum operating temperature.

9.0 milliamperes

Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

50.0 dc single section

Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.

-10.00 to 10.00 percent single section

Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.

metal

Capacitive Electrode Material
The chemical compound or mechanical mixture properties of which the capacitive electrode is fabricated.

tantalum

Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.

21.4000

Dc Leakage At Reference Temp
Stray direct current of relatively small value flows through the capacitor when voltage is impressed across it,measured at reference temperature.

1.000 microamperes

Terminal Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

solder

Case Insulation Material
The chemical compound or mechanical mixture properties of which the case insulation is fabricated.

plastic

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

terminal type and quantity, solder stud

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MILC39006 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 81349--8LC39006/9 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Answers.

What is the NSN for M39006-09-6324?

5910-00-007-7181

How is this classified for shipping?

Schedule B number: 8532290040
Fixed capacitors

What's the federal classification of M39006-09-6324?

FSC 5910 ⁓ Capacitors

Excluding semiconductor devices and associated hardware.

1.	MILC39006-9	Cage 81349
2.	M39006-09-8324	Cage 81349

M39006-09-6324

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. M39006-09-6324 specification

Answers.

NSN 5910-00-007-7181 CAPACITOR,FIXED,ELECTROLYTIC

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for M39006-09-6324 A member of our team will provide you with a price and availability quote

Similar by Design Other capacitors with similar characteristics

M39006-09-6324 / Capacitor,fixed,electrolyticWhat is the formal definition of this item?