Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CWR11NC225KC specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
chip type
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
established
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
0.010
A measurement of the longest dimension of a terminal,in distinction from width.
1.3 mm
A measurement of the longest dimension of the body,in distinction from width.
7.3 mm
A measurement taken at right angles to the length of the body,in distinction from thickness.
4.3 mm
A measurement from the bottom to the top of the body,in distinction from depth.
2.8 mm
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
electrode (s) grounded to case, w/gnd terminal
An indication of whether or not the item normally will accept flow of current in one direction only.
polarized
The national stock number or the identification information of the end equipment for which the item is a part.
primary input/output
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
2.200 microfarads single section
The temperature/s/ at which an item can function without voltage derating.
-55.0 deg celsius and 125.0 deg celsius
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
50.0 dc single section
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
The limits of permissible deviation per section of a measured value from a specified value.
-10.00/+10.00 percent single section
The chemical compound or mechanical mixture properties of which the case is fabricated.
ceramic
The chemical compound or mechanical mixture properties of which the capacitive electrode is fabricated.
tantalum
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
termination finish is hot solder dipped (min 60 MICRO-Inches)
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-55365 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
2 bonding pad
Answers.
1EA
Schedule B number: 8532290040
nmfc 061400
Fixed capacitors
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-01-482-0863 CAPACITOR,FIXED,ELECTROLYTIC
Used on primary input/output. termination finish is hot solder dipped (min 60 micro-inches)
- NIIN
- 014820863
- NIIN Date
- 02/08/01
- Schedule B
- 8532290040
- Name Code
- 00008
- FIIG
- A010B0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $12.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-C-55365/8 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for CWR11NC225KC A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061400 CONDENSERS/PARTS NOI/CAPACITORS
- UFC (universal freight code)
- 34450
Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
CWR11NC225KC / Capacitor,fixed,electrolyticWhat is the formal definition of this item?
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.
