M39014-05-2334 Fixed Ceramic Dielectr Capacitor

Datasheet. M39014-05-2334 specification

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

w/o mtg facilities, axial terminals

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

established

Reliability Failure Rate Level In Percent
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

0.0010

Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.

1.500in.

Body Diameter
The length of a straight line which passes through the center of the body,and terminates at the circumference.

0.350in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

0.690in.

Terminal Diameter
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

0.025in.

Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

no common or grounded electrode (s)

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

2vortac, FA-9996

Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

2.200 microfarads single section

Voltage Temp Limits Per Section In Percent Capacitance Change
The maximum permissible capacitance change per section with temperature over the operating temperature range,measured either with or without rated voltage applied.

-40.0/+15.0 with rated voltage applied single section

Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.

-55.0 deg celsius and 125.0 deg celsius

Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

50.0 dc single section

Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.

-20.00/+20.00 percent single section

Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.

ceramic

Insulation Resistance At Reference Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

100000.0 megohms

Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.

2.5000

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

reference data: 2A5C2, ti 6820.2, fa 9996/2, vortac, vor/dme, vor equipment, sec 8, vol 8, pg 8-225

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-C-39014 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

2 uninsulated wire lead

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

81349-MIL-C-39014/5 government specification

Answers.

What is the NSN for M39014-05-2334?

5910-01-302-7131

How is this classified for shipping?

Schedule B number: 8532290040
Fixed capacitors

What's the federal classification of M39014-05-2334?

FSC 5910 ⁓ Capacitors

Excluding semiconductor devices and associated hardware.

M39014-05-2334

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. M39014-05-2334 specification

Answers.

NSN 5910-01-302-7131 CAPACITOR,FIXED,CERAMIC DIELECTR

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Availability for M39014-05-2334 A member of our team will provide you with a price and availability quote

Similar by Design Other capacitors with similar characteristics

M39014-05-2334 / Capacitor,fixed,ceramic dielectrWhat is the formal definition of this item?