M39014-02-0387 Fixed Ceramic Dielectr Capacitor

Datasheet. M39014-02-0387 specification

Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

w/o mtg facilities terminal (s) on one surface

Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

established

Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.

1.250in.

Body Length
A measurement of the longest dimension of the body,in distinction from width.

0.290in.

Body Width
A measurement taken at right angles to the length of the body,in distinction from thickness.

0.290in.

Body Height
A measurement from the bottom to the top of the body,in distinction from depth.

0.090in.

Center To Center Distance Between Terminals Parallel To Length
The center to center distance between terminals parallel to the length of the item.

0.185in. and 0.215in.

Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

no common or grounded electrode (s)

Insulation Resistance At Maximum Operating Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.

10000.0 megohms

Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

47000.000 picofarads single section

Voltage Temp Limits Per Section In Percent Capacitance Change
The maximum permissible capacitance change per section with temperature over the operating temperature range,measured either with or without rated voltage applied.

-25.0/+15.0 with rated voltage applied single section

Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.

-55.0 deg celsius and 125.0 deg celsius

Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

100.0 dc single section

Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.

-10.00/+10.00 percent single section

Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.

plastic

Insulation Resistance At Reference Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

100000.0 megohms

Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.

2.5000

Terminal Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

solder

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MILC39014 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 81349-MILC39014/2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

2 uninsulated wire lead

Answers.

What is the NSN for M39014-02-0387?

5910-00-146-8413

How is this classified for shipping?

Schedule B number: 8532290040
nmfc 061400
Fixed capacitors

What's the federal classification of M39014-02-0387?

FSC 5910 ⁓ Capacitors

Excluding semiconductor devices and associated hardware.

M39014-02-0387

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. M39014-02-0387 specification

Answers.

NSN 5910-00-146-8413 CAPACITOR,FIXED,CERAMIC DIELECTR

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for M39014-02-0387 A member of our team will provide you with a price and availability quote

Shipping Information

Similar by Design Other capacitors with similar characteristics

M39014-02-0387 / Capacitor,fixed,ceramic dielectrWhat is the formal definition of this item?