Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CDR21BG331CGTM specification
Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
w/o mtg facilities, terminals on opposite surfaces
Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
established
Reliability Failure Rate Level In Percent
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
1.0000
Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.
A measurement of the longest dimension of a terminal,in distinction from width.
0.250in.
Body Length
A measurement of the longest dimension of the body,in distinction from width.
A measurement of the longest dimension of the body,in distinction from width.
0.135in.
Body Width
A measurement taken at right angles to the length of the body,in distinction from thickness.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.060in. and 0.100in.
Body Height
A measurement from the bottom to the top of the body,in distinction from depth.
A measurement from the bottom to the top of the body,in distinction from depth.
0.110in.
Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
no common or grounded electrode (s)
Insulation Resistance At Maximum Operating Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.
100000.0 megohms
Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
330.000 picofarads single section
Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.
The temperature/s/ at which an item can function without voltage derating.
-55.0 deg celsius and 125.0 deg celsius
Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius
The constant that represents the proportionate change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.
The constant that represents the proportionate change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.
90.0 single section
Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
200.0 dc single section
Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius
The limits of permissible deviation of the temperature coefficient per section from the rated value,expressed in parts per million per degree celsius.
The limits of permissible deviation of the temperature coefficient per section from the rated value,expressed in parts per million per degree celsius.
-20.0/+20.0 single section
Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.
The limits of permissible deviation per section of a measured value from a specified value.
-2.00/+2.00 percent single section
Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.
The chemical compound or mechanical mixture properties of which the case is fabricated.
ceramic
Insulation Resistance At Reference Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.
1000000.0 megohms
Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.
The ratio of resistance to capacitive reactance measured at reference temperature.
0.0500
Precious Material And Location
An indication of the precious material and its location in the item.
An indication of the precious material and its location in the item.
terminals silver
Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-55681 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
2 ribbon
Specification/standard Data
The document designator of the specification or standard which established the item of supply.
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-55681/5 government specification
Answers.
How is this classified for shipping?
Schedule B number: 8532290040
nmfc 061400
Fixed capacitors
What's the federal classification of CDR21BG331CGTM?
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-01-213-6260 CAPACITOR,FIXED,CERAMIC DIELECTR
- NIIN
- 012136260
- NIIN Date
- 07/29/85
- Schedule B
- 8532290040
- Name Code
- 00007
- FIIG
- A010B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $22.43 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-C-55681/5 | Cage 81349 |
Major End Users Countries and entities
- - Germany
Availability for CDR21BG331CGTM A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061400 CONDENSERS/PARTS NOI/CAPACITORS
- UFC (universal freight code)
- 34450
Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
CDR21BG331CGTM / Capacitor,fixed,ceramic dielectrWhat is the formal definition of this item?
A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.
