Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 441-0761-001 specification
Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
w/o mtg facilities terminal (s) on one surface
Reliability Indicator
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
Terminal Length
A measurement of the longest dimension of a terminal,in distinction from width.
A measurement of the longest dimension of a terminal,in distinction from width.
1.500in.
Body Length
A measurement of the longest dimension of the body,in distinction from width.
A measurement of the longest dimension of the body,in distinction from width.
0.643in.
Body Width
A measurement taken at right angles to the length of the body,in distinction from thickness.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.593in.
Body Height
A measurement from the bottom to the top of the body,in distinction from depth.
A measurement from the bottom to the top of the body,in distinction from depth.
0.115in.
Center To Center Distance Between Terminals Parallel To Length
The center to center distance between terminals parallel to the length of the item.
The center to center distance between terminals parallel to the length of the item.
0.390in. and 0.410in.
Schematic Diagram Designator
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.
no common or grounded electrode (s)
Insulation Resistance At Maximum Operating Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.
500.0 megohms
Capacitance Value Per Section
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.
0.500 microfarads single section
Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.
The temperature/s/ at which an item can function without voltage derating.
-55.0 deg celsius and 125.0 deg celsius
Nonderated Continuous Voltage Rating And Type Per Section
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.
50.0 dc single section
Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
test
Tolerance Range Per Section
The limits of permissible deviation per section of a measured value from a specified value.
The limits of permissible deviation per section of a measured value from a specified value.
-10.00/+10.00 percent single section
Case Material
The chemical compound or mechanical mixture properties of which the case is fabricated.
The chemical compound or mechanical mixture properties of which the case is fabricated.
ceramic
Insulation Resistance At Reference Temp
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.
1000.0 megohms
Dissipation Factor At Reference Temp In Percent
The ratio of resistance to capacitive reactance measured at reference temperature.
The ratio of resistance to capacitive reactance measured at reference temperature.
2.5000
Terminal Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.
solder
Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
94756-A441-0761 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
2 uninsulated wire lead
Answers.
What quantity is this sold in?
1EA
How is this classified for shipping?
Schedule B number: 8532290040
nmfc 061400
Fixed capacitors
What's the federal classification of 441-0761-001?
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-00-901-3922 CAPACITOR,FIXED,CERAMIC DIELECTR
- NIIN
- 009013922
- NIIN Date
- 01/01/60
- Schedule B
- 8532290040
- Name Code
- 00007
- FIIG
- A010B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $57.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 9501 | Cage 12294 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for 441-0761-001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061400 CONDENSERS/PARTS NOI/CAPACITORS
- UFC (universal freight code)
- 34450
Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
441-0761-001 / Capacitor,fixed,ceramic dielectrWhat is the formal definition of this item?
A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.
