Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A2220597G2 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.750in. ⁓1-3/4"
The distance measured in a straight line from the bottom to the top of an item.
1.406in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.938in.
The minimum and maximum limits of temperature at which the item is rated for operation.
-65.0/+125.0 deg celsius
The pattern or arrangement that describes the mounting configuration of the item.
2 mtg holes 1/8 in. dia, 1-1/8 in. c to c
The designation that identifies the schematic diagram of the contact configuration.
single pole, double throw
The means of attaching the item.
flange
An indication of whether the drive voltage is the same as,or different from,the input voltage.
unequal
The value,or range of values,for which the drive is rated.
6.3 ac pounds per hour wet
The number of complete cyclic changes,per unit of time,for which the drive is rated.
60.0 hertz
An indication of whether the item is designed to actuate /make/ a contact before or after the preceding contact deactuates /breaks/.
breaks before makes
The value,or range of values,for which the contact is rated.
10.0 dc pounds per hour with retaining chain
The amount of current for which the contact is rated.
1.0 milliamperes
The difference in phase between two alternating quantities having the same frequency,expressed in degrees.
64.0
That portion of each driving cycle during which electrical continuity exists between the center contact and one stationary contact,expressed in degrees.
155.0 and 185.0
An indication of whether or not a feature for plug in mounting is provided.
not provided
Indicates the connection location.
top
Answers.
1EA
0.938 inches
Schedule B number: 8538907080
nmfc 061300
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-678-0458 CHOPPER,ELECTRONIC
0.938" overall width 1.750" overall length
- NIIN
- 006780458
- NIIN Date
- 01/01/63
- Schedule B
- 8538907080
- Name Code
- 19759
- FIIG
- T320-K
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $220.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for A2220597G2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other choppers with similar characteristics
Nothing similar to this part number was found in our inventory
A2220597G2 / Chopper,electronicWhat is the formal definition of this item?
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. for items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. for those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. for an electromechanical item whose coil is designed for direct current only, see vibrator, interrupter and vibrator, self-rectifying.
