Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS27401-32M specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.718in. ⁓1-23/32"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
1.396in. single mounting facility and 1.446in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
0.525in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.320in.
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
0.150in. single mounting facility
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
metal
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
The number of individual /not electrically connected/ windings.
1
The purpose for which the item is designed.
specific
The number of coils included on the item.
1
Indicates the type of duty provided.
continuous
The means of quenching an arc.
air
Indicates the type and number of facilities by which the item is mounted.
2 slotted hole single mounting facility
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
Those features,not otherwise specified,which may be required for proper functioning of the item.
coil voltage suppression and polarized
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
1.191 cubicin.
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
2 pole, double throw, one position momentary
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
110.0 milliamperes dc single winding
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.01 seconds fixed operate and release time
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
28.0 volts dc 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
4.0 amperes ac motor load and 4.0 amperes dc motor load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
8.0 amperes ac inductive load and 8.0 amperes dc inductive load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
10.0 amperes ac resistive load and 10.0 amperes dc resistive load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
2.0 amperes ac lamp load and 2.0 amperes dc lamp load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
115.0 ac and 28.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
established reliability; failure rate 1 percent per 10, 000 operations
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-R-6106 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
8 wire hook all functions
The document designator of the specification or standard which established the item of supply.
96906-MS27401 government standard
Answers.
1EA
1.320 inches maximum
Schedule B number: 8536490075
nmfc 061300
Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-111-1317 RELAY,ELECTROMAGNETIC
established reliability; failure rate 1 percent per 10, 000 operations 1.320" overall width 1.718" overall length
- NIIN
- 011111317
- NIIN Date
- 04/11/81
- Schedule B
- 8536490075
- Name Code
- 32512
- FIIG
- A03300
- QUP
- 1
- Historical Price
- $164.80 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-PRF-6106 | Cage 81349 |
| 2. | MIL-R-6106 | Cage 81349 |
| 3. | MS27401-32 | Cage 96906 |
| 4. | 10132623 | Cage A486G |
Major End Users Countries and entities
- - Finland
- - Malaysia
- - Canada
- - France
- - Italy
Availability for MS27401-32M A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
MS27401-32M / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
