Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS24115-2 specification
Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.880in. ⁓1-57/64"
Center To Center Distance Between Mounting Facilities Parallel To Width
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
1.562in. single mounting facility
Overall Height
The distance measured in a straight line from the bottom to the top of an item.
The distance measured in a straight line from the bottom to the top of an item.
1.380in.
Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.320in.
Environmental Protection
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic
Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.152in. single mounting facility
Winding Quantity
The number of individual /not electrically connected/ windings.
The number of individual /not electrically connected/ windings.
1
Coil Quantity
The number of coils included on the item.
The number of coils included on the item.
1
Winding Dc Resistance Rating
The measured opposition to the flow of direct current offered by the item winding.
The measured opposition to the flow of direct current offered by the item winding.
190.0 ohms single winding
Duty Type
Indicates the type of duty provided.
Indicates the type of duty provided.
continuous
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
2 unthreaded hole single mounting facility
Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line single mounting facility
Time Delay
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.015 seconds fixed release time
Time Delay
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.0150 seconds fixed operate time
Operating Voltage Rating And Type At Specified Temp
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
26.5 volts dc 25 deg celsius single winding
Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
2.0 amperes dc resistive load
Main Contact Maximum Voltage Rating In Volts
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
26.5 dc
Nondefinitive Spec/std Data
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
a class and 2 type and 2 grade
Answers.
What is the overall width?
1.320 inches
How is this classified for shipping?
Schedule B number: 8536410020
nmfc 061300
Relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v
What's the federal classification of MS24115-2?
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-503-6550 RELAY,ELECTROMAGNETIC
1.320" overall width 1.880" overall length
- NIIN
- 005036550
- NIIN Date
- 01/01/61
- Schedule B
- 8536410020
- Name Code
- 32512
- FIIG
- A03300
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | R25018 | Cage 81349 |
Major End Users Countries and entities
- - Brazil
- - Italy
Availability for MS24115-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
MS24115-2 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
